GGB Trail Can Issue

[vrscr43]

Anyone have any issues using this can on a 2021, 154, 2.6" hardcore.
I get a slight hesitation around 5500 to 6500 rpm.
Above and below this rpm it is fine.
Sled is stock other than the can and machine is out of break in, 300 km on the machine.
I pulled the can and rode with the stock silencer and had no issues.
This was happening at Edmonton altitude.
Sent an email to GGB to see what they have to say about it.

 

[gdhillon]

I had similar issues with 2 ggb cans on my axys 800. Different sled I know, but after all my research I found ggb to be seemingly hit and miss

 

[vrscr43]

Maybe this was the issue?
Spring is gone
Cant find it either.

 

[Mr Helmut]

Anyone have any issues using this can on a 2021, 154, 2.6" hardcore.
I get a slight hesitation around 5500 to 6500 rpm.
Above and below this rpm it is fine.
Sled is stock other than the can and machine is out of break in, 300 km on the machine.
I pulled the can and rode with the stock silencer and had no issues.
This was happening at Edmonton altitude.
Sent an email to GGB to see what they have to say about it.

I have noticed same behavior as you with my alpha and GGB quite can

 

[vrscr43]

I contacted GGB.
They had me destroy the can and a new one is on the way.
No charge to me.
I am hoping it was just a bad can.
Regardless I am impressed wit the customer service.