Boost-it part numbers needed

[moto5151]

Good day, Im prepping my 2015 pro rmk 800 with boost-it setup for this up coming season and noticed my AFR sensor has failed. Does anyone know what the part number is that Boost-it used on their kits for the wide band O2 sensor? The numbers are worn off mine, and i cant seem to get any answers from Neil anymore.

Thanks

 

[Modman]

Good day, Im prepping my 2015 pro rmk 800 with boost-it setup for this up coming season and noticed my AFR sensor has failed. Does anyone know what the part number is that Boost-it used on their kits for the wide band O2 sensor? The numbers are worn off mine, and i cant seem to get any answers from Neil anymore.

Thanks

Post a picture of it and the pin connector. Someone will likely know. Guessing a Bosch, since that's the majority of them out there in the world.

 

[gedakbx]

Check with F A S T they might be able to help

 

[Bnorth]

Is it for a gauge or does it actually go to the box? Bosch LSU 4.9 is what most of the older gauges used. https://www.aemelectronics.com/prod...2-sensors/bosch-lsu-4-9-replacement-o2-sensor

 

[ABMax24]

Here you are:

These are for the AEM wideband O2 gauge, as to my knowledge the boost it fuel controller was not closed loop, at least mine is not.

 

[moto5151]

Here you are:

These are for the AEM wideband O2 gauge, as to my knowledge the boost it fuel controller was not closed loop, at least mine is not.

View attachment 246558

View attachment 246559

Thanks alot for this. Pretty sure this is exactly what im looking for.