Axle nut

Bezzola

Active VIP Member
Joined
Feb 10, 2009
Messages
382
Reaction score
185
Location
edmonton
Anyone know the torque on the nut for the rear axle on a 2018 outlander XMR
 

Bezzola

Active VIP Member
Joined
Feb 10, 2009
Messages
382
Reaction score
185
Location
edmonton
Do you know if the rear bearings can be done with out press
 

papajake

Active VIP Member
Joined
Dec 5, 2006
Messages
2,338
Reaction score
3,784
Location
Didsbury, Alberta
if the bearings are in the hub you will need to press them in and out and the nut should be nothing less than 80 ft lbs
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
8,715
Reaction score
13,948
Location
Leduc Alberta
Do you know if the rear bearings can be done with out press

You can pound them in and out with a hammer and punch. Put the new bearings in the freezer and warm the hub when installing them. That way they will drop in.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
126,867
Reaction score
49,005
Location
Leduc
Torque the nut to proper spec or it will not last. Also grease new bearing they come with basically nothing for grease.

My Rzr I just did. Took 7 pumps of grease per wheel. Nut is 180 Ft lbs
 

Bezzola

Active VIP Member
Joined
Feb 10, 2009
Messages
382
Reaction score
185
Location
edmonton
I bought a greaser thats fits the can am bearings and built a hand held press to carry in the trailer
 
Top Bottom