20 axys 800, wear on weights

[gdhillon]

I was changing my weights last night and noticed some extensive (imo) wear to my weights. I will try and upload pics (edit: s/o to the new site that was really easy!)

It looks like the pin bushing has taken quite the side beating. Sled has ~279 miles, with about 240 of those miles running an altitude clutch kit

Any ideas what could cause this? The nut was tight on all 3

Side note: I think the shmegma looking stuff is soap residue from cleaning the primary lol

 

[gedakbx]

Looks like you need to replace the bushings and the pin that the weight pivots on. We had to do this on a 2017 800.

 

[gdhillon]

Looks like you need to replace the bushings and the pin that the weight pivots on. We had to do this on a 2017 800.

ok, do you know what caused the wear on yours?

 

[gedakbx]

the light weight crank i believe. (vibration i guess)

 

[gdhillon]

the light weight crank i believe. (vibration i guess)

That sounds gnarly to me!

How had yours held up these past years?

 

[gedakbx]

We replaced them at about 2000 miles last year then finished out the rest of the year and sold it this fall

 

[gdhillon]

Mine only has 281 miles haha.

Maybe it’s a bad omen

I’ll order a pushing kit and new pins asap l, thanks for the help!

 

[Cableguy]

that low of mileage should be a warranty issue
should put a dial guage on that crank

 

[gdhillon]

Ok I’ll talk to my dealer, thanks man