Hey guys hoping to get some feedback on a couple problems I've been having with my gf's 2014 Summit 800 Sport (ptek). Recently did full motor overhaul (top end, crank, ect.) Ran great for the first couple trips in the mountains with the exception of running rich (around 22:1). The adjustment screw was set properly at 16.5mm, changed it to 17.5mm and it made a minor change but not much - Problem 1
Problem 2 - A couple weeks ago gf rolled it down a small mountain. Since, every time I cold start it in the AM it idles poorly, very poorly, (sounds like 1 cylinder) blowing hard smoke. After warming it up it cleans right up and runs great.
I'm at a loss on both of these issues. Hoping for some help.
Problem 2 - A couple weeks ago gf rolled it down a small mountain. Since, every time I cold start it in the AM it idles poorly, very poorly, (sounds like 1 cylinder) blowing hard smoke. After warming it up it cleans right up and runs great.
I'm at a loss on both of these issues. Hoping for some help.