Search results

  1. C

    freeride with tmotion

    If I put t motion in a 2012 freeride will it handle like an xm?
  2. C

    Xm 154 or 163

    Hi there, I am looking at buying an xm for the up coming season. I was riding a 146 this year and was planning on buying a 154 this coming season. However I have found a great deal on a 163 and I am wondering if there's a huge difference? I am more of a free rider. Jumps trees pow ect not just...
  3. C

    Vibration from clucth side on XP

    Hey there, I have recently noticed a slight vibration from the clutch side, I know its a broad topic that could be many things but any ideas on narrowing down what it might be would be much appreciated.
  4. C

    Regular XP maintainance

    Just wondering what your guys "pre weekend" maintainance is on your sleds? Just a clutch clean and a once over? Or?
  5. C

    2010 Arctic Cat M8 won't start cold

    Is your choke defiantly working often the little plunger underneath the dash can become brittle in the cold, therefor allowing it to snap, had this problem the other day pull your choke out of the dash remove the switch from the choke cable and just have someone manully pull the cable while you...
  6. C

    Fuel gauge issues

    The float can get disorientated easily. Pretty common
  7. C

    2012 XP Rollover now no brakes! Help!

    I had the same problem I just sat there for 5-10 minutes pumping it until it came back
  8. C

    Upper A-Arm tweaked?

    Your s modual could be slightly tweaked, you can not notice it by just eye balling, you wont really be able to tell until you get a fresh a arm in there, the difference will be very minimal on the chassis but quite noticeable as you have shown on the spindle
  9. C

    How long do P Tek motors last?

    If you take care of it and run synthetic I could see no problem with getting over 8k
  10. C

    2008 summit xp 800 running on one cylinder

    Just get a syringe full off gas, remove the boot on your carb coming from the air box, open butterfly (full throttle) squirt gas into carb, then attempt starting, if it fires on both cylinders you have a carb problem, remove the carb do a thorough cleaning, and re try. Worked well for me.
Top Bottom