Search results

I've had great luck with BPS B2 lights in every sled they have been put in as well as every vehicle they have been put in. super bright.

I welded the exact same type of spacers to the bottom of my limitless deck to spread the weight as well. Underneath the box are the same size plates with spacers to sandwich it all together. I also lightly turn buckle my deck in the reduce the amount of stress on the legs and welds when the...

On a ford if you really wanted to you could just not have the stop and signal lights wired in. Extra load on the break circuit is why they think a trailer is attached. Kinda defeats the purpose of the blade light. But you could still wire it up as a marker light.

yes you have your regular 1 year warranty until 2022 and 3 years of extended snowcheck warranty until 2025 for a total of 4 years of warranty.

Not sure. Been that way since new. From my research it looks like a bunch of people have the same problem. But why don't I get snow in the glovebox with the waterproof bag?

Time to upgrade the Fiancé sled. So she will get my 22 Khoas 146. I checked a 850 Khaos slash 155. Got stuck with all black because thats all any dealer had pre configured. But got all the other options I wanted. With the money saved on black VS color I'll wrap it. Until the get the p22 sorted...

First ride with mine the glovebox filled with snow so everything in the bag was soaked. I switched to the waterproof bag and like it. Everything stays dry. Haven't had snow in the glovebox since. So I switched back to the liner for one ride and everything was covered in snow again. Back to the...

I ran a 2019 F150 Lariat Crew Cab with 6.5' box for a couple years. Only used it for around home going to the lake. But I did run it across the scales fully loaded with 2 newer Polaris sleds. I was about 100# under my GVWR. I cant remember the exact numbers but I had quite a bit of room on my...

scuff them up with a scotchbrite pad and wipe clean with brake clean. Once a year I will take the springs and weights out and put everything in the parts washer at work. makes them look better then new.

I ran the stock can for the first 700km. My pipe rubbed from the very beginning.

add a 9/16" washer before putting that rubber back under the pipe and you will be good to go.

same spec as axys yes. adjuster is above the throttle bodies.

It is awkward to get at but I like it better then having to take my handlebar bag off to get at it.

Put new plugs in it. They run way richer when they are cold and warming up. One of the plugs is fowled. While ya got the hood off adjust the throttle cable freeplay. I can guarantee it is loose.

Ya I would say so. They are a very heavy duty tire combo with a larger bearing in the center.

Check out SK Wheelz on Facebook. Guy makes them as a side gig. They are a little pricier but way heavier duty and use larger dolly wheels instead of them shitty plastic ones. I have a 4" lip from my driveway into my garage and they climb up it no problem without falling off or out of place.

If you or someone you know has an account at a NAPA parts store they can order the gates belts at a pretty big discount in most cases.

I like mine for the fact that it is easier to organize stuff behind the gauge. Have not rode with it yet so can't comment on that.

Have never had an issue running my gates c12 belts in the stock belt holder.

Check out SK Wheelz on facebook. Guy makes and sells them as a side gig. They are a little pricier but they are super heavy duty and use a dolly wheel instead of a crappy little plastic wheel. I use them to drive from the street up my driveway and into the garage. I have a 3" lip from my...