Thanks guys! The grass is graded away with a sidewalk on one side and washed rock on the other. I'm quite sure it's coming off the sidewalk under the bottom plate (pressure treated). The other side the water weeps in from the snow banks against the wall. I was hoping to either pour on the inside...
So i rebuilt my garage a few years back, its in great shape still except!, i have water coming in from the outside, whether its rain, or melting snow it comes in under the bottom plate along the walls. The garage is a new poured slab which does not funnel to the middle and out the big door and...
The problem i ran into was my sled didnt have the right bracket needed to mount the starter, so have a look at your front support for the 2 bolt holes you will mount the starter with. i had to change mine out.
Sled is done! road it all last season. The jackshaft is a bit of a pain but no biggie, went with a 2.5" track nothing special just a good ole stocker!!
yep that will be an issue, you may have to tilt the motor or move it back/left so the rave clears the post. Is that how you aligned the clutches? float the secondary it will allow u to move the motor left of center if needed, and test fit your exhaust system for any issues... Watch that your...
Here is what Earth X had to say:
Hi Cory, that sled will need our ETX24. Unfortunately, the model will not be available to ship until Feb next year.
and here is what Antigravity Batteries had to say:
For the 800 we would recommend our 12-cell battery... But it also depends on the type of...
The shorty cover and short carb boots are a big help in this install, the guys at Specialty let me set up there for a weekend to do some work . Ineeded to align the clutches for best location. I had the frame apart to do this, u may want to take everything above the motor off to make it easier...