I took a 15" flat screw driver and put a notch in the tip for the spring. i used the brace to pry the spring off.
There has to be a long hook tool out there somewhere.
I am looking for some help. When is the best time of the winter season to visit Cooke City? We are thinking of planning our first sledding trip to Cooke and would like to know when the best time to go might be. Any help is appreciated. Thanks in advance.
I am wondering what gears to run on a 21 expert turbo?
It will have a dj (ibackshift) clutch kit and a Maptun tune.
I believe the sleds come stock with 21t top 53t bottom but correct me
If I’m wrong
Thanks
I bought a new princess auto sled lift.
I have a 21 expert 165 and the screw jack hits the skid plate.
If I pull the lift closer to the front, it doesn’t lift the track off the ground.
Has anyone modded these lifts to work better?
I tapped hockey pucks and ran a 4” bolt through to try and...
Does anyone know what the pins are called or where to get them for a heated throttle. I want to put a finger throttle from a xm on my g4 and the only difference is the heated harness pins
I was wondering the shock length difference from 36” front end to 34”?
I have a 2021 expert turbo and I’d like to change to the 34” front end. If anyone has the parts as well, let me know. Or anyone who might need the 36” parts let me know. The sled only has 110 original km on it.
Post the mile/km you have on your factory turbo as well as any issues you had.
Just to get a better understanding of the quality of these engines under boost.
I hope everyones having a good year so far.
I am posting this because there is 4 of us that have never been to Valemount before. We will be heading out that way and staying in Valemount.
I am wondering if there is anyone looking for a group to tag along with that knows the area? or if there is...
I am in search for anyone who has experience with E-mods on the 850's.
i have a crack on the clutch side of my e-mod(it is cracked where the recalled bolt goes through)
as far as i can tell this side of the e-mod can be replaced rather than replacing the whole e-mod.
any help would be appreciated.