jhurkot
Active VIP Member
Day 1 oil tank leaking top and bottom.
Day 2 sled randomly shuts off and won’t idle.
Definitely keeping my skidoo.
Day 2 sled randomly shuts off and won’t idle.
Definitely keeping my skidoo.
landing date of 2022 rmk matrix
- Thread starter rightsideup
- Start date
gedakbx
Active VIP Member
Same oil tank as the axys tight snug if you tighten any harder it cross threads and leaks.
jhurkot
Active VIP Member
It’s a different oil tank than the Axys. I don’t think I over tightened the cap it looked level in the tank. I think my whole oil tank needs to get replaced.
Keep us posted on the shutting off and oil tank issue.. Im heading out later this week to break mine in
OnlyPolaris
Active VIP Member
check out the inserts for the oil tank neck. after a while the neck and threads get distorted and will leak. the insert will keep everything nice and round. have never had leaking issues after I started using them. I know yours is new and shouldn't be leaking but even with a new tank it will eventually start to leak down the road. spend the $20 on the insert and save the headache.
mt.sledder
Active member
I will take a matryx boost with a leaky oil cap over the invisible matryx boost that's still not in my garage.
Chrisco
Active VIP Member
My dealer called Friday said one of mine is in Canada and should be here in a week.
Have you gotten the shipped email? I got an email on the 3rd that my sled shipped from roseau on the 24th. Hasn't showed up at the dealership yet
Got boost want snow
Active VIP Member
I picked mine up last Friday (not boost). Heading out tomorrow to start break in. Hopefully as reliable as my Yamaha’s were (hahaha)
What did you leave dealer tell you for break in procedure?
Got boost want snow
Active VIP Member
To run it above 4500 with bursts of wot but not extended periods on the pin hahaha
Shredder
Active VIP Member
So in other words...............just send it as you see fit. 
That is how I break in every 2 stroke.So in other words...............just send it as you see fit.
Bring them up to temp, then 1/4 throttle for a couple minutes to heat everything evenly
........ then giver!
This will be the first Polaris motor I try it on, when it arrives....................
drew562
Active VIP Member
We raced ice oval as kids. Dad also raced drag cars and had a performance garage. In the 70s. He always told me 2 cold starts. Rum new motor to get it warm and up to temperature. Shut it off let it cool. Then fire it up and giver.
snopro
Active VIP Member
You ever race in the old NWSA Drew?
snopro
Active VIP Member
Cool! I was in the NWSA from 80-90. Never raced the Deckers in Alberta but down at Eagle. Know the Tomeys well. I raced against Bratco, Bensons, Dohei and Liba’s. What classes you run?
Caper11
Active VIP Member
How about Gord MacDonald, did you race him at Eagle River?
snopro
Active VIP Member
Not that I remember. Is he the son of the BRP dealer who works for BRP Matt? I have heard of him if he is. The 2 times is was there I raced the Sprint 540 class and the second time was Formula 1 with my twin tracker. What class did he race?
Similar threads
For Sale -
2022 Polaris Boost Pro RMK 165
