Recent content by Jimbara

Thats exactly what im looking at doing. any ideas on a splash guard?

I just need to cut up the bed liner I found out in a field after a wind storm for the skis.

I changed the track on my sled and tried to sell it but couldnt even give it away. So i decided to cut it in half length wise and screw it down to my trailer to help with loading and unloading. let me know what ya think.

My buddy has a 2008 M8 162" with 1200 miles with a can in good shape. the rest is stock. what would be a fair price on it?

mine did this a couple years ago and it was the power valve cable coming off of the servo. there is an 8 dollar update clip that holds the cables from coming out of the pully.

Thanks for letting us know what the problem was.

not that i could see. I opened the hood and pulled the throttle. the only thing i can think is the extra fuel that didnt get burned when the intakes were clogged. that or the throttle bodies icing up and not closing when idling.

I was riding last weekend in some deep snow and my intakes where getting clogged up with snow and would start to bog until i cleared them. After clearing them and stopping it would idle at 3k for a couple minutes then drop if it did drop. It never did it the two times before this ride. Any...

Motor mount. It looks like it sat right in the middle on that ridge right side of photo.

I asked the same question and no one would give me a straight answer. I finally just raised my sled up and let the track hang. I tightened it up till the track hung about 2-3" from the bottom of the rails. I think the only real way to know is to ride it and see how much noise it makes and adjust...

When loading. and its rectangular tubing.

any ideas on how to hold the ramp?

The deck is about 8'6"-9'. I haven't measured it but it hangs over the bed about 6". I already have the materials to build it. Its going to be close to 10'

I recently got a sled deck and there was no ramp with it. I know wtf. I need to build one my only question is what is the bes way to attach it to the dove tail when loading. I was hoping you guys could post some pics and any of your ideas.

Im hooking back up my throttle bodies on my 06 M7 and I cant remember how the oil pump is supposed to be set. There are two lines on the oil pump one is the idle position and the other is the full throttle position. but neither are labeled. I think that i have it hooked up right but wanted to be...