Recent content by billybigrigs

These are taken directly from the SSA agreement. As stated in Snowmobile trail agreement on page 2: 2.2.2 in the agreement says public access will not be restricted in any manner. And As stated in Trail Development Agreement on Page 4 – Access Restrictions, Under no circumstances will public...

As long as the tow truck is a ford they won't get far. lol

This is exactly what we are trying to do.

don't let fear and common sense hold ya back. lol

1977 Chevy Big 10, 350 2bbl, 4 spd stick. No power, bent frame, interminate brakes, still going on the farm.

It was close to seven grand, but the billet torque conventer was close to two grand. I also got the transfer case rebuilt at the same time. I would say just the tranny was around five grand, and I push my truck pretty hard and its been flawless.

I had to get my tranny completely rebuilt, smoked all the clutch packs and cracked the torque converter, but they put a trans go shift kit in the new one, along with other stuff. It was expensive, but works awesome.

Anderson's auto on 22nd in Saskatoon. Got mine done there last year.

I got an 05 LLY with a afe intake and filter, diablo predator programmer, afe turbo mouthpeice, straight pipe, lift with 35" tires and I get 22-24 mpg on the highway and 14 in the city. I also use dsg 4+ premium fuel additive, and have a oil pan heater so it shifts into od sooner when it spends...

"worst engine in modern diesel history" Diesel power magazine. I know several people that have had them, chipped and stock. All garbage. Do not buy. Biggest mistake you'll ever make

I had a highlifter lift on my quad for 2 yrs, and took it off cause it was bent and getting wrecked. Don't bother with it, if you want a little lift put spacers on your springs.

Does your gauge light up, but show nothing? If so its a loose wire. You might have power to the gauge, but a different wire brings the info from the ecm. My quad only had 1200kms when it happened to me.

How far did you go? My broken wire was on the main wiring harness beside the gear shifter. I hope this helps because it's a very frustrating problem.

Take off the plastic and start taking the tape off the wiring harness and you will find a broken wire.