Recent content by andus

  1. andus

    13 Pro 800 Stalling

    Seems it was ice in my fuel lines. I poured half a bottle of anti-freeze in the tank, let it idle for a few minutes, and I was good to go. Indoor storage from now on!
  2. andus

    13 Pro 800 Stalling

    I started my sled today to load it into my truck. It idles fine and I let it warm up to 91F. When I squeeze the throttle to try and move the sled it moves a couple inches and then wants to stall. If I don't let go the throttle it shuts off. At first I thought maybe the engine wasn't warmed up...
  3. andus

    Best Plugs for 12.5:1 head in 2013 Pro RMK 800?

    Awesome. Thanks
  4. andus

    Best Plugs for 12.5:1 head in 2013 Pro RMK 800?

    I've ordered a new head for my '13 Pro that's 12.5:1 (0-3000 ft). I'm wondering if I should use different plugs than I've been using with the stock head :confused:
  5. andus

    What track speeds are you seeing on 2013 Pro's??

    91 mph on a groomed trail on my stock '13 155
  6. andus

    Looks like a 2012 Pro for me...

    and Arctic FX Graphics have awesome selections of wraps for the Pro. There's a few other places to get wraps too but those 2 are my preferences. I put an SLP blue/pink clutch spring in my Pro and it made a noticeable difference for throttle response. The HPS can is expensive but works really...
  7. andus

    Plug Question?

    The Polaris parts catalogue lists the NGK GR9A-EG for the '12 Pro http://parts.polarisind.com/Assemblies.asp
  8. andus

    tip over sensor on pro

    Could you possibly mean the Throttle Position Sensor (TPS)? There's a thread on here telling you how to test the TPS to make sure it isn't causing your problem.
  9. andus

    Hps cans in stock for pro

    PM'ed
  10. andus

    Bearing behind top belt drive sprocket

    Same with mine
  11. andus

    lets see your pro rmk/assault

    My '13 Pro. These pics were taken in early December. I'll post some newer and better ones when I get home from work in a couple weeks.
  12. andus

    OK - Electric Start on a RMK Pro 800....YES OR NO

    Glad to hear the screens do the job. I installed a QD skid plate too. It was during the skid plate install that I realized you have to take the battery out to get snow and ice out from under the QD, haha
  13. andus

    OK - Electric Start on a RMK Pro 800....YES OR NO

    I know this is a pretty late reply to the thread and the original poster has probably already made up his mind, but anyway.... I have e-start on my 13 pro and for the most part I love it, but I would suggest getting footwell screens. It's a pain in the a$$ to clean snow out from under the...
  14. andus

    Ideal tools for tool kit?

    ^ x 2, plus a mini flashlight, hex key set, and torx key set. A bottle of lock de-icer is also handy for nuts and bolt heads that you can't quite get to well enough to chip ice off of.
  15. andus

    Where's everyone buying their Q-drive belts?

    That's exactly what I did
Top Bottom