LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Superchargers for Yamaha Nitro

Discuss Superchargers for Yamaha Nitro in the YAMAHA CHAT forums; Im looking into a Supercharger instead of a turbo for the next sled I wish to purchace. The Supercharger because ...


  1. #1
    Administrator
    rknight111's Avatar
    Join Date
    Sep 2006
    Location
    Edmonton, AB
    Posts
    7,493
    Post Thanks / Like

    Superchargers for Yamaha Nitro

    Im looking into a Supercharger instead of a turbo for the next sled I wish to purchace. The Supercharger because there is no lag.
    Here's what I found, Mountain Performance Stage 1 Kit:
    Stage I Performance:
    Stage I kits are intended for a maximum of 11 PSI (slightly less at extreme altitudes over 10,000 ft). At 10 to 11 PSI we recommend all models use a 50/50 mix of Premium Gas (92+ R+M/2 Octane) and Race Gas (110+ Motor Octane) - or better yet 100% race gas. Kits can be run at 5-7lbs of boost (recommend 5psi at sea level). Each pound of boost is equal to approximately a 10HP increase, so when decreasing boost to run pump gas, you can apply that information to determine HP. Stage 1 Nytro produces 220HP at 11PSI. The Phazer kit ships at 140HP at 11pounds of boost. The Apex is shipping at 240+HP at 10 pounds of boost. The RX-1 boasts a consumer friendly 230+HP also at 10 pounds of boost. Vector Stage I is well in excess of 200HP at just over 10 pounds of boost. For those desiring more power, numbers in excess of 270 to 350+HP is coming on Stage II and Stage III.












    Ron

    2008 Turbo Nytro 162, Stage 3, Boost It Turbo Systems, This system Rocks, thanks NM
    Coming to my collection in April - 2014 Razor 1000, to Joe at Cycle Works



  2. #2
    Member rmk800's Avatar
    Join Date
    Nov 2006
    Location
    whitecourt
    Posts
    334
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    i have seen stage 2 superchargers for the nytro with about 260 hp , just can't remember which site now. i'll get back to you on that
    rmk800

  3. #3
    Super Moderator

    catmando's Avatar
    Join Date
    Nov 2006
    Location
    Edmonton
    Posts
    6,450
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    Its a Yamaha,better go Stage 2 LOL!
    catmando!
    06 Yamaha Apex Turbo

    05 Polaris RMK 900

    1987 yamaha SRV 540

    Member Of Team Slim
    Proud Member of the Boondockers

    [SIGPIC][/SIG

  4. #4
    Member Lococoin's Avatar
    Join Date
    Aug 2007
    Location
    Lethbridge, Alberta
    Posts
    639
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    you going to buy a new sled this year?
    Steve
    Founder and member of:
    Outlaw ATV Club: Edmonton, Alberta
    www.outlawatvclub.com
    2011 Polaris Pro RMK 163

  5. #5
    Member rmk800's Avatar
    Join Date
    Nov 2006
    Location
    whitecourt
    Posts
    334
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    find that site- it was mountain performance - stage 2 at 16 psi of boost gives you 280 hp
    rmk800

  6. #6
    Administrator
    rknight111's Avatar
    Join Date
    Sep 2006
    Location
    Edmonton, AB
    Posts
    7,493
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    Quote Originally Posted by Lococoin View Post
    you going to buy a new sled this year?
    Yes, if not one for next year.
    And I was looking into Mountain Performance stage 1 and stage 2 kits
    Ron

    2008 Turbo Nytro 162, Stage 3, Boost It Turbo Systems, This system Rocks, thanks NM
    Coming to my collection in April - 2014 Razor 1000, to Joe at Cycle Works

  7. #7
    Member lightweight's Avatar
    Join Date
    Nov 2006
    Location
    where the snow is
    Posts
    137
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    just remember the supercharger will not compensate for altitude. and a properly set up turbo has very little lag. Just trying to help.

  8. #8
    Member Lococoin's Avatar
    Join Date
    Aug 2007
    Location
    Lethbridge, Alberta
    Posts
    639
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    Quote Originally Posted by rknight111 View Post
    Yes, if not one for next year.
    And I was looking into Mountain Performance stage 1 and stage 2 kits
    Cool, are you planning on doing the install yourself? Id like to help wrench on it if you do.
    Steve
    Founder and member of:
    Outlaw ATV Club: Edmonton, Alberta
    www.outlawatvclub.com
    2011 Polaris Pro RMK 163



  9. #9
    Super Moderator

    Sledderglen's Avatar
    Join Date
    Nov 2006
    Location
    The Trailerhood
    Posts
    5,815
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    Ron, talked to a rider on sun afternoon that has a supercharger on his Nytro. He had it done in Edson at dealership. He said it works very well but had a warranty issue that day. Seems a blower pulley on the crankshaft came loose and spun on shaft. Dealer was very interested and said easy fix. On the supercharger system you can run 2 different boost levels. 1 mild on pump gas for about 170-180 HP or full boost for 230+ HP but for that you need to premix race fuel 1/2 and 1/2. He runs at full boost and is claiming track speed around 125 KM. Has no problem going places. with boost sounds like a great sled yes a little heavy but thet all are when stuck.
    Last edited by rknight111; January 2nd, 2008 at 06:38 AM.
    2008 XP 154 Yellow,Black and Blue
    2007 Can Am 500 XT Red
    2-1953 Buick 2Dr. hardtop classics
    Other junk all spread around
    Trail Director for Fort Saskatchewan Snow Angels and ASA Sign Guy
    Team Bushwacker Memeber
    Member of Team Slim
    Holder of the #1 Trail Pass for Alberta
    Member of Team Snow and Mud

    Missing my buddy Albert


    Next event summer campout

  10. #10
    Member dieselmech_22's Avatar
    Join Date
    Nov 2007
    Location
    edmonton
    Posts
    88
    Post Thanks / Like

    Re: Superchargers for Yamaha Nitro

    E & S motorsports in fort sask. had two in thier shop last week getting superchargers they had one nytro they did a 163" track on and they figured they would be 300+ ponies when they were done that would be interesting to see! The mechanic out there said he has done a bunch of turbo's and superchargers already this year on the nytro's he is pretty knowledgable when I have talked to him and not a bullsh*tter he might be a really good guy to talk to for info!
    Last edited by rknight111; January 2nd, 2008 at 01:51 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Search Engine Friendly URLs by vBSEO