99 mountain max 700 triple bog

Ewbaker95

Member
Joined
Jan 27, 2015
Messages
11
Reaction score
0
Location
Wyoming
I took the sled up to the mountains today and it ran pretty good. When we first started the sled up it ran really good no bog idled great. About and hour or so into the ride it started to bog if you pin it from low rpms to about 6000 rpms. It sputters and really doesn't want to go unless you let up and let it slowly get to 6000 them you can pin it and away you go. If your trail riding or weaving in and out of trees and just barely hitting the throttle it's pretty snappy, but you can't pin it from a dead stop and expect it to get on the pipes and take off it sputters until 6000 and takes up hard. So I guess my question is is there something I adjust on the carbs so it doesn't bog from a dead stop to 8500 + rpms?
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
Sounds like a pilot jet issue. Try increasing the pilot jet or adjusting the mixture screw to make it richer. I if bog gets worse, go the other way to lean it out.
 

SRXtreme

Active member
Joined
Dec 26, 2014
Messages
48
Reaction score
33
Location
CALGARY
A quick check on pilot jet: pin throttle and flip choke.It will either fall on it's face or take off.
 

Ewbaker95

Member
Joined
Jan 27, 2015
Messages
11
Reaction score
0
Location
Wyoming
A quick check on pilot jet: pin throttle and flip choke.It will either fall on it's face or take off.
Falls on it's face hard. I think it's running way to rich the plugs look wet when I pull them out.
 

Ewbaker95

Member
Joined
Jan 27, 2015
Messages
11
Reaction score
0
Location
Wyoming
Sounds like a pilot jet issue. Try increasing the pilot jet or adjusting the mixture screw to make it richer. I if bog gets worse, go the other way to lean it out.

What size incriminates should i change it at a time?
 
Top Bottom