LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

08 Nytro subframe Stiffeners

Discuss 08 Nytro subframe Stiffeners in the YAMAHA CHAT forums; Beef up your 08 Nytro subframe before you bend it and you will bend it. The subframe stiffeners that the ...


  1. #1
    Member Washy's Avatar
    Join Date
    Oct 2007
    Location
    Langdon Alberta
    Posts
    265
    Post Thanks / Like

    08 Nytro subframe Stiffeners

    Beef up your 08 Nytro subframe before you bend it and you will bend it.

    The subframe stiffeners that the 09 subframe has and the 08 subframe does not have, are off the waterjet and ready for shipping. Extra reinforcement in a small but critical area added to the rear stiffener.

    They have to be welded onto the subframe.

    PM me.
    Boost-It Pro Racers edge skid 3" track.
    2013 Summit XM Turbo 163
    2013 Pro RMK 163 Crashed
    2008 MCXpress Boosted Nytro Sold



  2. #2
    woodies
    woodies's Avatar

    Re: 08 Nytro subframe Stiffeners

    how far down do you have to strip it to weld in?

  3. #3
    Member Washy's Avatar
    Join Date
    Oct 2007
    Location
    Langdon Alberta
    Posts
    265
    Post Thanks / Like

    Re: 08 Nytro subframe Stiffeners

    You will have to make clearance by lifting the sled or kind of rolling it. All I took off of mine was the side panels, platic lower side panels, Skid Plate, and move the rubber boots that cover the steering tie rods away from the subframe to do the Rear stiffener and welded it in from the bottom. You really should take the subframe out so you can weld on both sides(to and bottom) but I did not on my own Nytro. For the front Stiffener I removed the shock and the upper a arm from the spindle, to rotate it out of the way and welded it in. Tight spot but it can be done. Disconnect the batter y and CDI/computer if you are welding with it in the sled or you may fry the computer.
    Boost-It Pro Racers edge skid 3" track.
    2013 Summit XM Turbo 163
    2013 Pro RMK 163 Crashed
    2008 MCXpress Boosted Nytro Sold

  4. #4
    Member Lococoin's Avatar
    Join Date
    Aug 2007
    Location
    Lethbridge, Alberta
    Posts
    640
    Post Thanks / Like

    Re: 08 Nytro subframe Stiffeners

    Picked up a set to put on while i have my subframe off for the turbo install. Perfect timing.

    Thanks T-Nytro.
    Steve
    Founder and member of:
    Outlaw ATV Club: Edmonton, Alberta
    www.outlawatvclub.com
    2011 Polaris Pro RMK 163

  5. #5
    woodies
    woodies's Avatar

    Re: 08 Nytro subframe Stiffeners

    would i need to take any more stuff off?
    Attached Images Attached Images

  6. #6
    Member Washy's Avatar
    Join Date
    Oct 2007
    Location
    Langdon Alberta
    Posts
    265
    Post Thanks / Like

    Re: 08 Nytro subframe Stiffeners

    Quote Originally Posted by woodies View Post
    would i need to take any more stuff off?
    Not unless you want to weld on the top side of the rear plate. You will just have to take out the rear push button holder on the steering boots and keep the plastic out of the way while welding. To get into the front stiffener it would be easier to remove the shock and remove the upper a arm off the spindle for easier access. You can still leave it attached to the sled though. Dissconnect the battery and CDI/computer. But no you are basically there. You would see once you went to weld it in.
    Boost-It Pro Racers edge skid 3" track.
    2013 Summit XM Turbo 163
    2013 Pro RMK 163 Crashed
    2008 MCXpress Boosted Nytro Sold

  7. #7
    woodies
    woodies's Avatar

    Re: 08 Nytro subframe Stiffeners

    cool then this is over kill?
    Attached Images Attached Images

  8. #8
    Member Washy's Avatar
    Join Date
    Oct 2007
    Location
    Langdon Alberta
    Posts
    265
    Post Thanks / Like

    Re: 08 Nytro subframe Stiffeners

    Quote Originally Posted by woodies View Post
    cool then this is over kill?
    Even better because now you can weld from the top and the bottom and have easy access to the front stiffener. Let me know.
    Boost-It Pro Racers edge skid 3" track.
    2013 Summit XM Turbo 163
    2013 Pro RMK 163 Crashed
    2008 MCXpress Boosted Nytro Sold



  9. #9
    Member 08nytromtx's Avatar
    Join Date
    Oct 2008
    Location
    Sheboygan
    Posts
    1
    Post Thanks / Like

    Re: 08 Nytro subframe Stiffeners

    How much $?

  10. #10
    woodies
    woodies's Avatar

    Re: 08 Nytro subframe Stiffeners

    payment sent get them comming thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Search Engine Friendly URLs by vBSEO