1981 Yamaha Enticer 340

h20bugs

Member
Joined
Sep 20, 2007
Messages
15
Reaction score
0
Location
Alberta
Hey Maxwell have you still got the Yamaha for sale? Looking for a 250 or 340 the.
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
I have a 1980 Enticer witch my father bought for me last year. Since a lot of you restore Enticers i thought this was a great place to ask about parts. I need the left and right skis, the left and right ski shocks, and the ski rods. If any one knows of any site with cheap shipping into Saskatchewan, Canada please please please post where or e-mail me! I need the parts asap because the skis are rusting and worn through and the shocks are broke and are going to fall off.

P.S. i love the enticer! it is a great cheap sled for and kid to learn on! It doesn't have too much power but it has enough! it is also a perfect size and 12 year olds will easily wip it around!


Thank you sooo much!:)



I'm an EBAY fan when in a pinch..........never had issues with Ebay....problem is its a 2 week to 3 week wait.....we'll see what kind of shape these skis from our donor sled look like and see what we can do for ya.....All I want from this sled right now is the throttle cable for my 340 and the carburetor/fuel pump for the 250....I hate that carb in the 250.....
 

Captjacksparrow

Active VIP Member
Joined
Nov 8, 2007
Messages
668
Reaction score
926
Location
Sylvan Lake
I picked my kids up an 82 ET 340. Very nice shape but the seat is bad. I bought a seat cover for it but the foam and base is really screwed when I got the old cover off so I'm looking for a good seat if anyone has one or knows of one, pm me, thanks Dan

ps: hey H2o bugs, is that you Dave?
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
Mikuni Carb onto a ET250

I'm getting rid of the Keihin carb on the old ET250 and dropping in a Mikuni off a parts ET300 sled. I got the carb and fuel pump.....but of course I need an adapter plate .... has anyone tried this conversion? Or am I just experimenting here!! :rolleyes:
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
Flange on - had to make holes larger; will add a heat shield once I find my snips to knock the top off a bit on the heat shield itself.

flange.gif
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
Oh I probably need to re-jet the snot out of the carb too......
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
Carburetor In - I straightened the carb (not in this pic) - and I do need that heat shield. My only concern is the clearance and the clutch - as it expands I'll have about 3/4 of an inch between the carb and a high speed spinning object....that's what field tests are for! But I'll get to that later - I just need to get the fuel pump in there to feed the Mikuni.

carb-in.gif
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
STARTS and IDLES....woohoo....:)

Don't wanna smoke up the garage tonite, so I'll fart around with it outside tomorrow on the driveway....maybe wakeup my neighbours.....
 

SAFASTRO

Active member
Joined
Dec 8, 2009
Messages
55
Reaction score
6
Location
Calgary
Any vintage riders been on any good trails this year? I wouldn't mind trying Cataract Creek, but not sure if my sled would be good out there or not.

Any recommendations?
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
This is our "secret playground"!!!

It was a secret until our last run a couple weeks ago. We saw a couple of brand new Arctic Cats of the NON-VINTAGE variety roll in!! Haha....we already blasted all the new drifts and chew'd up the powder by the powerlines by the time they show'd up!! :rolleyes:
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
We need to take these old girls (no offence ladies) to Cataract Creek for a fun run!! :d
 

calgarysledguy

Active VIP Member
Joined
Oct 30, 2008
Messages
637
Reaction score
579
Location
calgary
Website
www.youtube.com
We need more snow!!!!!!

The ditches are drying up! :i_need_snow:



Yes they are.And what snow is there is hard as Concrete.I took the old 80 srx 440 out for a rip down the ditch today.WoW.That thing was all over the place hitting those hard drifts at 80 +mile/hr LOL .Come on snow. :beer::beer::beer:
 

DYSLEXIC

Active VIP Member
Joined
Nov 25, 2009
Messages
204
Reaction score
79
Location
Calgary
:d
We found snow today!! Ditch runn'n is soooo much fun.....but I think I may need a new crankshaft bearing.....:mad:

my clutch looks wobbly:eek:...not sure how to describe it....
 

bigdog67

Active VIP Member
Joined
Nov 20, 2006
Messages
477
Reaction score
152
Location
Edmonton
Here's a pic of the 78 Enticer I sold this past fall.Made some 10yr old very happy.[/ATTACH]
 

Attachments

  • IMG_0769.jpg
    IMG_0769.jpg
    72.7 KB · Views: 436
Top Bottom