Truck 7way plug troubles!???

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
Hi!! I need help my 7way plug on my truck only allows my clearance lights to work aswell as my tandem brakes but no lights, nor signle Lights and it's not the trailer I had that tested its my truck but the wiring looks fine, what could it be!? Fuses look fine so any help would be appreciated thanks the truck is a 2011 f250 if that helps thanks
 

sweld

Active VIP Member
Joined
Dec 20, 2009
Messages
1,363
Reaction score
1,591
Location
Redwater
Just gonna have to check your wiring at the back of your plug. My ford did the same thing everything looked ok but as I dug further there was a broken wire right behind the factory plug


Sent from my iPhone using
 

vodoo103

Active VIP Member
Joined
Jan 27, 2011
Messages
953
Reaction score
1,510
Location
Blindman River, Alberta
Have you tested each lead at the plug with a test light?
7pin-diagram.jpg

If it's dead at the plug and fuses are all happy, have to start tracing wires back to find a short. With truck off, you can check for continuity across the leads - if you have continuity, there's a short in your wiring somewhere.
 

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
Okay thanks well a few days before I had a trailer wiring code come up aswell as my four by four so I went in and thy deleted the codes the four wheel worked and the trailer wiring I thought was my flatbed because it had a broken plug could deleting it have something to do with it!!?
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,636
Reaction score
8,120
Location
Stettler Alberta
i have a little gadjet that plugs into the plug and lights up for each pin thats working ,,i use it alot at work.but like said before gotta check some wires
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,152
Reaction score
45,307
Location
BC
are the pins corroded causing a poor connection
 

BRP QSC

Active VIP Member
Joined
Jan 21, 2010
Messages
740
Reaction score
515
Location
Not Sure Yet
If your in Calgary you can stop in at my shop and I will check it out for you. Mayland Heights Autopro 839-19St NE 403 277-6617 and ask for me (Rich)
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
Anything after 1997 should be wired this way. Don't always assume color codes are correct but location is.
 

Attachments

  • faq043_ss_500.jpg
    faq043_ss_500.jpg
    34.6 KB · Views: 164

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
i have a little gadjet that plugs into the plug and lights up for each pin thats working ,,i use it alot at work.but like said before gotta check some wires
Yes I have that to and it only lights up with the clearance light on nothin else
 

Kruchy

Active member
Joined
Nov 16, 2009
Messages
119
Reaction score
37
Location
Lloydminster
My 2011 350 had the same problem. It was a broken wire behind the plug. Sounds like a ford problem but I had to buy a new one
 

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
Thanks to everyone who helped me out it was a 25amp fuse under the hood that was poohed and put a new one in and she's working thanks again everyone !!!!
 
Top Bottom