Dodge Longhorn 3500 lug nuts?

OVERKILL 19 · Oct 11, 2013

Anyone have a set they took off and want to sell?

the_real_wild1 · Oct 11, 2013

What is different with them over stock ones? I have a set off my old truck which was a slt. I have a new 1/2 ton longhorn now and didn't notice anything different with them

Summitric · Oct 11, 2013

Should all be the same? Check with autowreckers....... They'll have 'em

OVERKILL 19 · Oct 11, 2013

the_real_wild1 said:
What is different with them over stock ones? I have a set off my old truck which was a slt. I have a new 1/2 ton longhorn now and didn't notice anything different with them

The lug nuts are exsposed chrome I assume. My longhorn rims the lugs are not covered by a center cover. Tire guy just told me I cant run aftermarket lug nuts as The longhorn have a specific taper and you cant run anything but Dodge lug nuts........and @ $15.87 each from Dodge.....kinda gay!!!

Summitric · Oct 11, 2013

Get ahold of a wrecker.... Should be some chrome acorn nuts kicking around off a dodge 3500 with the chrome wheels

the_real_wild1 · Oct 11, 2013

Where do you live? I'll run down to the shed and make sure I still have them but they might work if you just need stock wheel nuts. Maybe check dodge online and see if the part number is differst

OVERKILL 19 · Oct 11, 2013

the_real_wild1 said:
Where do you live? I'll run down to the shed and make sure I still have them but they might work if you just need stock wheel nuts. Maybe check dodge online and see if the part number is differst

The longhorn is a different part #..accually there is two for 2012 Longhorn depending on what wheel option..I guess.

the_real_wild1 · Oct 11, 2013

Well sh!t. Where did you get them? Maybe they still have the lug nuts????

OVERKILL 19 · Oct 11, 2013

the_real_wild1 said:
Well sh!t. Where did you get them? Maybe they still have the lug nuts????

Thx
I have a call in but not holding out much hope!
I just figured I would buy some aftermarket ones for $50-60 ....fail!

gates559 · Oct 12, 2013

are you sure, I just went through this, the only diff is in 2012 they started using metric instead of standard.

gibsons · Oct 12, 2013

That's crazy. I took a peek on ebay and didn't see anything there either.

OVERKILL 19 · Oct 13, 2013

Summitric said:
Get ahold of a wrecker.... Should be some chrome acorn nuts kicking around off a dodge 3500 with the chrome wheels

I'll try that I'm not sure what they even look like. Ill cruise by the dealership and take a pic I guess. Here's the wheels

OVERKILL 19 · Oct 13, 2013

Ps the rubber will be for sale next week once I get them separated from rims. The rubber has 25 Kms maybe.

275-70-18

OVERKILL 19 · Oct 26, 2013

gates559 said:
are you sure, I just went through this, the only diff is in 2012 they started using metric instead of standard.

No Im not sure.. The guy at Canada custom Veh said I have to use Dodge only nuts as the taper is differant and he only stocks aftermarket nuts for aftermarket wheels.... I phoned every wreaker in red deer and a few in Edmonton with no luck. I went to the dealer and they cant seam to find them ether. They are calling HQ on monday but so far it looks like $17 each from dodge. But Im going to a different tire shop on tuesday to see what they have

JP. · Oct 26, 2013

OVERKILL 19 said:
No Im not sure.. The guy at Canada custom Veh said I have to use Dodge only nuts as the taper is differant and he only stocks aftermarket nuts for aftermarket wheels.... I phoned every wreaker in red deer and a few in Edmonton with no luck. I went to the dealer and they cant seam to find them ether. They are calling HQ on monday but so far it looks like $17 each from dodge. But Im going to a different tire shop on tuesday to see what they have

Canada custom vehicles is Jr B bush league

jeremy · Oct 26, 2013

When the 13 3500's came out there was a shortage of the LH wheel and some of them had the same as the 12 laramie's put on the truck.

jeremy · Oct 26, 2013

also I would try phoning Greg at Farleys truck and auto, he does a lot of work on Dodges, he may have some take offs.

gates559 · Oct 27, 2013

well if thats the case you can buy new studs and nuts a lot cheaper, but my wheels are still on. go buy a metric lug nut and see. take it to your local tire shop, they will tell you in about 30 seconds.

OVERKILL 19 · Oct 28, 2013

gates559 said:
well if thats the case you can buy new studs and nuts a lot cheaper, but my wheels are still on. go buy a metric lug nut and see. take it to your local tire shop, they will tell you in about 30 seconds.

Studs are not the problem it's the wheel stud hole has a dodge bat chit crazy taper, it's proving to be difficult . But I think kal tire has a set of nuts $9 each find out tomorrow

OVERKILL 19 · Oct 29, 2013

Finally buddy at kal tire ordered a set in... Extra goofy 14mm X 1.5mm X 22
Will be here Thursday. Sure good when ya find a good parts guy!

Dodge Longhorn 3500 lug nuts?

Active VIP Member

Active VIP Member

SUPER COOL MOD & Supporting Vendor

Active VIP Member

SUPER COOL MOD & Supporting Vendor

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Similar threads