cattechsummitrider
Active VIP Member
Its a bit messy
Installing drawers in the cabinets
Installing drawers in the cabinets
Lets see your enclosed
- Thread starter HoldMyBeerAndWatchThis
- Start date
MP Kid
Active VIP Member
Wow.. the in-floor is super nice, but that’s a lot of connections. Can’t imagine the leaks after 5-10 yrs of use.
I do like the fact that you used a router to “bury” the lines. Been think of a system like this for years. If you installed the lines under the sheeting, then spray foamed the bottom, do you think the heat would be the same?
I do like the fact that you used a router to “bury” the lines. Been think of a system like this for years. If you installed the lines under the sheeting, then spray foamed the bottom, do you think the heat would be the same?
cattechsummitrider
Active VIP Member
I think the heat would be close,, But if i did it under the sheeting ( would still router them in ) i would use 5/16 line and it would give a little more even heat ( you can feel a bit of difference with bare feet ) And I originally went with 2 inches of spray foam then went to 4 inches and there was quite a difference, The system is 5 years old this year and the only leak was from hose clamps needing retightening , used a really soft copper because it's expansion rate was very low and its longevity in industrial applications was really good
cattechsummitrider
Active VIP Member
And you could also have something like nudo flooring on top that lasts very well and carbides don't cut into
- Moderator
- #426
I paid 266.00
MP Kid
Active VIP Member
Does anyone in the Calgary area have one of these Chinese knockoff air heaters mounted in their trailer? I’d like to see one in action (especially right now when it’s damn cold outside)
- Moderator
- #428
- Admin
- #429
I got it at home and can sell it. I can get one In the summer
snoflake
Active VIP Member
Pimped out Featherlite with Polished Stainless cabinets. All exterior Aluminum has been recently polished as well. This one is for sale for $40g. should have the ad up later this week with more info. PM me if someone is looking for a sweet car/sled trailer **SOLD**
Last edited:
Trukker
Active VIP Member
Sweet trailer Snowflake . Looks like you spent sometime polishing it .......................
- Thread starter
- #433
HoldMyBeerAndWatchThis
Active VIP Member
TTT, its that time of the year again!
Sounds like you need railroad track broom
gotboost
Active VIP Member
My new TrailWest RPM enclosed sled trailer full heat with heated floor and lots of cabinets. My white 46 foot enclosed race trailer and my 20 foot race trailer
Attachments
papajake
Active VIP Member
I see you bought it from Airdrie Trailer I must of hooked it up for you is everything working for you we can't keep then in stock just sold our last 28 foot goose neck
gotboost
Active VIP Member
Everything is good Parts guy well that's a different story
We sold the Cargo Mate about 7-8 years ago and bought an all aluminum 2020 Snow Pro 20x8.5 with a 45k propane furnace, led lighting, corner cabinet with a battery and a converter that I installed, hanger rack, and spare tire. The floor has some kind of coating on it that protects it from getting torn up by our sleds. 1 man door, 2 windows, roof vent and 2 fuel doors.
Attachments
Chrisco
Active VIP Member
- Thread starter
- #440
HoldMyBeerAndWatchThis
Active VIP Member
Looks very nice, supper clean. Is that carpet under the hangers? what ever it is, great idea, I hate the marks from the swinging packs and gear.
Similar threads
