Sled Deck Swaying

Irocaz

Active member
Joined
Oct 31, 2011
Messages
104
Reaction score
117
Location
Alberta
I have a 7' Marlon Xplore II deck in a CC/SB Duramax and I will haul 2 sleds at a time or a SXS with a riser mounted on top. The deck is turn buckled and bolted to the box with the Marlon feet/levelers.

When I'm just hauling sleds I have no concerns unless I'm on a logging and I will see the deck swaying side to side a bit but not too bad. When I got the SXS on I can also see a bit of sway normal driving if there is any bumps, but on a bad gravel road or logging road there is a quite a bit in the sled deck itself and the box of the truck starts rocking around.

The Marlon has the deck itself is rated for 2,000lbs and I am probably around 1,750 with the riser/SXS/strapping/mud/etc.

Has anyone had to modify the sled deck to tye the front legs together for extra bracing? For the truck box what about running C-channel across for the sled deck to sit on and mount it into the frame similar to 5th wheel hitch brackets? has anyone actually had their box crack?
 

Irocaz

Active member
Joined
Oct 31, 2011
Messages
104
Reaction score
117
Location
Alberta
Hmm I know the rear ones are tight but never crawled in to check the front ones while it was loaded
 

TKrebs

Active VIP Member
Joined
Sep 19, 2012
Messages
316
Reaction score
422
Location
Fort Sask , AB
That could be the swaying your seeing . I had the same issue . I always had everything nice and tight with nothing on the deck and could never figure out why it swayed a bit when loaded , and found that . With all the weight on it , the deck settles into the box and the turnbuckles pick up a little bit of slack . Adjusting them nice and snug while it was loaded did the trick !
 

Irocaz

Active member
Joined
Oct 31, 2011
Messages
104
Reaction score
117
Location
Alberta
Awesome, il give that a try next time I get the sxs on there!
 

captain extreme

Active VIP Member
Joined
Apr 2, 2007
Messages
274
Reaction score
429
Location
Calgary
This was my fix for that, SOLID
d94088ad6f66815c06fd07bef1c28953.jpg
 

Irocaz

Active member
Joined
Oct 31, 2011
Messages
104
Reaction score
117
Location
Alberta
That’s a great idea!

where/ how did you attach it at the bottom?

I was looking under the truck last night and thinking in the back I’m going to get some 2” square tubing to run between the box and frame And bolt it solid. For the front I’m not 100% sure yet but thinking of running tubing front to back between the box crossmembers and Tying it into the box frame mounts.
 

captain extreme

Active VIP Member
Joined
Apr 2, 2007
Messages
274
Reaction score
429
Location
Calgary
Used these, on top and bottom https://www.canadiantire.ca/en/pdp/5-000-lb-medium-duty-d-ring-0402775p.html#srp


That’s a great idea!

where/ how did you attach it at the bottom?

I was looking under the truck last night and thinking in the back I’m going to get some 2” square tubing to run between the box and frame And bolt it solid. For the front I’m not 100% sure yet but thinking of running tubing front to back between the box crossmembers and Tying it into the box frame mounts.
 

captain extreme

Active VIP Member
Joined
Apr 2, 2007
Messages
274
Reaction score
429
Location
Calgary
my marathon classic deck has aluminium strapping bars crossed like that in an X bolted to each leg and center bolted in the middle of the X

ya my marathon and marlon came with similar, but was to flimsy. Had build solid square tubing and X braced top to bottom welded and bolted, was much more solid than the strapping bars. They just didn't fit in the Chev 2020 box the way I wanted them too, so went this route. Saved my homemade bars for future use if Chev changes the box design again
 

overkill19

Active VIP Member
Joined
Mar 9, 2014
Messages
305
Reaction score
690
I’d check welds for cracks while crawling up front. Side to side movement and sled deck welds don’t mix well. Some decks are slapped together as quick as possible and the welding is sub par
 

Bezzola

Active VIP Member
Joined
Feb 10, 2009
Messages
482
Reaction score
385
Location
edmonton
My sons turnbuckles kept coming loose in the front so i double nutted them and we ran cross cables.
 

800tundra

Active member
Joined
Mar 10, 2008
Messages
59
Reaction score
110
Location
Dapp Alberta
My marlon explore had all four feet crack from swaying . Added some stiffeners to the feet , but still sways a lot. Cable Bracing etc. would help
 

Beels

Active VIP Member
Joined
Dec 14, 2009
Messages
1,071
Reaction score
2,151
Location
Swirvin' like George Jones
my marathon classic deck has aluminium strapping bars crossed like that in an X bolted to each leg and center bolted in the middle of the X


Full Lotus was the same way. Crossed bracing on the front legs. There's a removable cross bar for the back legs too, but it restricted bed access underneath so I didn't use it. Bolted in to the box, no turnbuckles, no sway with 2 sleds.
 

Irocaz

Active member
Joined
Oct 31, 2011
Messages
104
Reaction score
117
Location
Alberta
136DB1E2-9194-4627-9787-3E4A38F40BFE.jpg

Took the deck to a welder and he came up with this
 

mammothdecks

Member
Joined
Feb 17, 2022
Messages
15
Reaction score
44
Location
Kamloops, BC
Website
www.mammothdecks.com
Full Lotus was the same way. Crossed bracing on the front legs. There's a removable cross bar for the back legs too, but it restricted bed access underneath so I didn't use it. Bolted in to the box, no turnbuckles, no sway with 2 sleds.
We currently use schedule 40 and schedule 80 aluminum piping all throughout our decks. This has proven a massive difference in any sway and the durability of our decks.
 

1200

Active VIP Member
Joined
Nov 11, 2010
Messages
537
Reaction score
595
Location
k town
Ya most of these cheap decks are made so shitty. Who would not put braces on the legs . Just makes u wonder who designs this ch!t. I always just make my own deck.
 
Top Bottom