2008 Chev Silverado 2500HD Body Rebuild

Legend14

Active VIP Member
Joined
May 4, 2020
Messages
1,115
Reaction score
3,625
Location
Hills
After looking into this I think I can DIY raptor liner my entire crew cab long box for $1000.....it’s all in the prep!
 

GreyGhost

Active VIP Member
Joined
Jan 15, 2020
Messages
347
Reaction score
417
Location
Swift Current
Is it pretty hard to get set up with tig? I have zero experience with it

Depends how hardcore you want to go. You can get some generic machines that’ll only cost you about a thousand and that comes with mig, tig, and stick. I’m not very good with tig myself and prefer mig but if you’re any good with oxy and acetylene then you’d have no problems
 

Lem Lamb

Active VIP Member
Joined
Apr 5, 2010
Messages
3,576
Reaction score
6,448
Location
Lacombe AB
Should of sprayed the 50/50 mix of gear oil/ diesel fuel every 6 months under the whole under chassy,,, inner box sides and fenders... every 4 months if your unit encounters gravel roads with calcium on them...

My 2005 is still rust free...

Life is just that simple
 

GreyGhost

Active VIP Member
Joined
Jan 15, 2020
Messages
347
Reaction score
417
Location
Swift Current
Should of sprayed the 50/50 mix of gear oil/ diesel fuel every 6 months under the whole under chassy,,, inner box sides and fenders... every 4 months if your unit encounters gravel roads with calcium on them...

My 2005 is still rust free...

Life is just that simple

Huh I’ve never heard of that. Don’t know how I’d feel about spraying a track with that
 

cattechsummitrider

Active VIP Member
Joined
Nov 27, 2006
Messages
4,007
Reaction score
3,095
Location
sask
Huh I’ve never heard of that. Don’t know how I’d feel about spraying a track with that

I know people in Ontario that get anti rust sprayed on the vehicles every fall, its popular over there, never seen anyone do it with diesel and oil,, should work
 
Top Bottom