Ford diesel will not run!?

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
Got a 2005 6.0 Ford F-350 went to fire it up and it ran for 10-15 mins than it died it'll crank and catch run for a tiny bit than that's it and now it won't even run just will crank over, any ideas!?!
 

Mantis

Active member
Joined
Jan 20, 2010
Messages
66
Reaction score
151
Location
Castlegar
HPOP - high pressure oil pump? Any issues prior...like longer cranks to start? I believe that the 6.0 needs a minimum of 5-600 psi at the injectors to start...if it can't build that, it won't start. Can be a number of things that can cause that... o-rings, STC fitting, stand pipes...pretty well need a gauge to narrow it down.

https://m.youtube.com/watch?v=-TYa4OpdUns
https://m.youtube.com/watch?v=-VFu-73mpSQ
 

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,027
Reaction score
1,184
Location
canada
Thanks guys I'm gonna lean towards a gelling issue the truck hasn't been ran since summer last than my friend parked it, went to run it today and than this problem occurred, he dumped some stuff in it and it's still a no go
 

Mach1

Active VIP Member
Joined
Sep 23, 2015
Messages
932
Reaction score
765
Location
Kimberley
Better hope it's not oil pump as it is a bbbbbtch to change it, yes as other guys said with that 6.0 it can be many things. Good luck.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
Check ICP pig tail wires, unplug and plug back in. Mine did it few years ago and it was only a bad connection, i guess its common. good luck.
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
47,997
Reaction score
32,140
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
If you have a good scanner, you can see what is happening with the injection oil pressure etc... You can read all the numbers that are required for the engine to fire... About the only and best way to diagnose these 6.0l pstd "no start" conditions. My old '04 had similar happen to this, and had to put the hpop(high pressure oil pump) and icp(injection control pressure) sensor and ipr(injection pressure regulator) solenoid into it... But it could be a hundred different possibilities....
 

j335

Active VIP Member
Joined
Jan 3, 2007
Messages
1,866
Reaction score
1,807
Location
AB
Diesel system gelled up? Easy to pull fuel filter on them?
 

Trashy

Super Moderator
Moderator
Joined
Nov 16, 2008
Messages
130,459
Reaction score
100,436
Location
Fort Macleod
You have a fuel filter on top of the engine, turn on your key to see if the fuel overflows?
This will eliminate the fuel pump
Gelling could happen if it does have summer fuel in it?
The other thing it could be, is the FICM.
My 05 had the same issue, I changed it out and it worked great after that.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
Got a 2005 6.0 Ford F-350 went to fire it up and it ran for 10-15 mins than it died it'll crank and catch run for a tiny bit than that's it and now it won't even run just will crank over, any ideas!?!

When it comes to your 6leaker you could be throwing parts at it all day and not get it fixed. Read some of the suggestions haha holy fawk id be broke real quick. Trust me bud i feel your pain, i dumped **** loads into my stupidduty years ago too, but when shes running good its the best! Find a friend or someone that has a 6.0 and try swapping parts first..HPOP isn't a easy fix but start with the FICM ICP IPR small stuff like that...a SCT X4 tunner can be your best friend to and worth the coin. If your still stuck and your in the edm area, then give Gary at Lomax Diesel a call...Dude is great and fair priced. Keep us posted as i like to know what the hell your issue was. If you do get it fixed and its not studded....PM me i have a left over box of APR head studs id sell ya cheap...good luck.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
hmmm, headaches and time are cheap...any diesel tech will cost you big mula. Id take a headache and have cash in pocket and exhaust all my options before i dumped it off and said have a look....just my 2cents
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
The O.P asked for help or ideas....i'm sure if he had coin to take it to a tech it would have been fixed by now. ^^ Correct cheap code reader can't hurt.
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
47,997
Reaction score
32,140
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
the o.p asked for help or ideas....i'm sure if he had coin to take it to a tech it would have been fixed by now. ^^ correct cheap code reader can't hurt.

at least with a cheap code reader, he'll have an idea where to start... Otherwise, waste of time and money throwing parts at anything
 

Ronaha

Active VIP Member
Joined
Dec 11, 2015
Messages
1,606
Reaction score
3,038
Location
Narnia
Man this thread brings back alota painful memories of my Ford woes,I went through everything mentioned x10, by the time I finally sold them I was pretty much a tech,as mentioned if there is no physical obvious problems you should scan it.
 

Zrock

Active VIP Member
Joined
Aug 26, 2014
Messages
596
Reaction score
902
Location
BC
Check the easy thing first.. OIL... if its low on oil then it will starve the pump and then no fuel. I found out the hard way on my 7.3 bad injector O ring and was eating oil on me and died on the road. Pulled dipstick and it was just showing.
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,771
Reaction score
3,876
Location
Pemberton
I am still managing to keep my 04 6.0L running. Just had to resolder the FICM for the second time last month. DieselTechRon youtube vids are well worth watching. FICM voltage is easy to check. You pretty need a good code reader to work on them. I have the autoenginuity one.
 
Top Bottom