Cabinet for Furnace in Sled Trailer.

Rusty99 · Sep 18, 2017

Hi Folks,

I have an older Wells Cargo V nose trailer that I am in the process of upgrading with a furnace. I'm stumped on getting a low cost but good looking furnace cabinet to mount it on the wall.

I've made many phone calls all over Edmonton, Red Deer and Calgary looking for a furnace cabinet without success. Only Allen Dale trailer in Red Deer bring in a specialty cabinet from a local fabricator for $475!! It is a nice cabinet just more than I am wanting to spend.

What did you guys do to hang your furnace? I want the finished product to look nice without breaking the bank.

Cheers

TylerG · Sep 18, 2017

Rusty99 said:
Hi Folks,

I have an older Wells Cargo V nose trailer that I am in the process of upgrading with a furnace. I'm stumped on getting a low cost but good looking furnace cabinet to mount it on the wall.

I've made many phone calls all over Edmonton, Red Deer and Calgary looking for a furnace cabinet without success. Only Allen Dale trailer in Red Deer bring in a specialty cabinet from a local fabricator for $475!! It is a nice cabinet just more than I am wanting to spend.

What did you guys do to hang your furnace? I want the finished product to look nice without breaking the bank.

Cheers

Call Ron with Paradis Motorsports at 780-970-4940 and see if he can help you out.

blubbles · Sep 19, 2017

Good Fast Cheap... Pick any 2.

That being said we went Fast and cheap. 12 bucks for 2 angle brackets and a piece of plywood and done.

Will work just fine till we get around to ducting the thing. PM me if you want a photo. Wont let me upload anything for some reason.

vodoo103 · Sep 19, 2017

My old Charmac trailer had a furnace cabinet from the factory built out of Melamine - trailer wore out & I sold it. Never had any problems with the cabinet.
You could also just get a piece of aluminum formed to house the furnace unit if you want to save some $$.

Turblue · Sep 21, 2017

Just make a platform and bend up a piece of checker plate to cover it.

OVERKILL 19 · Oct 22, 2017

Rusty99 said:
Hi Folks,

I have an older Wells Cargo V nose trailer that I am in the process of upgrading with a furnace. I'm stumped on getting a low cost but good looking furnace cabinet to mount it on the wall.

I've made many phone calls all over Edmonton, Red Deer and Calgary looking for a furnace cabinet without success. Only Allen Dale trailer in Red Deer bring in a specialty cabinet from a local fabricator for $475!! It is a nice cabinet just more than I am wanting to spend.

What did you guys do to hang your furnace? I want the finished product to look nice without breaking the bank.

Cheers

DSW Manufacturing
Talk to Dean. Great guy
He’s the guy Allan Dale gets his from. Might be a bit cheaper but $475 ... not sure ur gunna get much less

firecatab · Nov 5, 2017

I had two storage cabinets in mine so I took one and reinforced it with aluminum and installed the furnace and a power converter. Put 2 vents on one end a cold air return on the other.

Cabinet for Furnace in Sled Trailer.

Rusty99

Active member

TylerG

Super Mod Geek

blubbles

Active VIP Member

vodoo103

Active VIP Member

Turblue

Active VIP Member

OVERKILL 19

Active VIP Member

firecatab

Active VIP Member

Attachments

Similar threads