RPM troubles with bike man bopk

[Jwaldner93]

Alright sled nuts here's what I got going on, I have a 2013 m8 pro climb 153 2.5" track last year I installed the bike man bolt on performance kit stage 1, since then I have had troubles hitting peak rpm, so I snooped around and found that I had way to much weight in my gold star adjustable weights so I contacted bike man got the suggested magnet count and placement which was 0-2-2-0. My helix is in hole number 4. With these changes I went from peak 6800-7000 rpm to 76-7800 rpm. Still not quite hitting that rpm and just doesn't feel like the power is there. Asking for suggestions. Should I try take more magnets out of weights? Or is something else going on ? I also have the pc5 auto tune

 

[Eldereldo]

My tuning guide from bikeman only shows using hole 4 on big bored at 6000+ ft, otherwise it recommends hole 5,

 

[Jwaldner93]

My tuning guide from bikeman only shows using hole 4 on big bored at 6000+ ft, otherwise it recommends hole 5,

Thanks for reply, interesting, where can I get my hands on one of those tuning guides ?

 

[Eldereldo]

It came with my kit, so I assume you can ask bikeman to send you one. Maybe it is available on their website as well?

 

[Jwaldner93]

It came with my kit, so I assume you can ask bikeman to send you one. Maybe it is available on their website as well?

Ok thanks I will look into that.

 

[Jwaldner93]

Under further inspection I found that my helix on my secondary was put in hole 2 I have been looking at it wrong. I assume this is my issue ? Going to be contacting dealer who installed.