Oxygen Sensor Placement

[grizzlymud]

Where to place oxygen Sensor in m1000. Was thinking in the can?

 

[007sevens]

was told by DynoJet that it really doesn't matter where, but he suggested right before the can in the last part of the taper of the pipe.

 

[Team Pigeon]

Don't put it the chamber, too much turbulent gas and you wouldn't get a good reading.

I put mine on the intake pipe side of the can, right below the pipe/can joint. It's the best picture I got right now for it- you can just see it below the red sticker. It's a nice spot, out of the way. If you mount it on the pipe, that's another sensor you have to remove whenever you pull the pipe.

 

[ippielb]

Make sure you mount the sensor tipped down a little bit, So moisture doesn't settle in the sensor.