My brother took my sled out to ride on the lake yesterday. The belt grenaded and did a bit of damage. The retainer bolt stretched and there was almost a 1/4 inch of play side to side. I went to take the bolt out and it snapped. That's how a found out it was stretched
Originally there were 3 washers, the spacer that sits inside the clutch and then larger washer that the bolt tightens up against. When I put the clutch back on I can't put any washers on or else the clutch will have some play side to side.
I know I need to get a hold of an alignment tool to check but I thought I would get some opinions. I've never had a serious problem on this sled in the 3 years I've ridden it.
Originally there were 3 washers, the spacer that sits inside the clutch and then larger washer that the bolt tightens up against. When I put the clutch back on I can't put any washers on or else the clutch will have some play side to side.
I know I need to get a hold of an alignment tool to check but I thought I would get some opinions. I've never had a serious problem on this sled in the 3 years I've ridden it.