Newbe Questions about '09 TRX420FG

Phyer Phyter

Active VIP Member
Joined
Aug 15, 2010
Messages
179
Reaction score
8
Location
Edmonton
1) After 1st oil change, I've noticed that when cold trans shifts hard (almost lurches) Once it is warmed up it shifts fine. Dealer said to use 10/40 oil, which I did. Owners manual says 10/30 or 10/40. Should I have gone with 10/30 instead?

2) Dealer also said don't use synthetic oil as it will cause shifting problems with new style dual synchro shifting. Any thoughts on this?

Anything anyone can offer is appreciated. Bill.
 

give_it_all_

Active VIP Member
Joined
Sep 2, 2009
Messages
183
Reaction score
0
Location
Ontario
I can't say anything about the oil, I use 5w30 I believe. Maybe 10w30...

Anyways, mine shifts hard as well when it is cold. First time of the day it is always a bit rough. If you can, let it run for 30 seconds or a minute and it's fine.
 

Phyer Phyter

Active VIP Member
Joined
Aug 15, 2010
Messages
179
Reaction score
8
Location
Edmonton
I can't say anything about the oil, I use 5w30 I believe. Maybe 10w30...

Anyways, mine shifts hard as well when it is cold. First time of the day it is always a bit rough. If you can, let it run for 30 seconds or a minute and it's fine.

Thanks for the reply. I did let it warm up last weekend before I went out and it shifted fine.
 
Top Bottom