measuring points

[scrapmaster]

hey all just wondering if anyone can provide some measuring points, tryin to figure out if i got bent a arms or bulkhead? i know shes had some pretty aggresive endos and rolls on harpack also hit the odd tree.. going from front spindles to rear suspension mount on the tunnel its out about 1/2" side to side, also how much of an improvment would a float set up make over the standard?

 

[blastoff]

Could be in the bulkhead, if you have access to a tram gauge works the best. If no visible paint flaking on the control arms it could be the bulkhead. Some times these things puzzle a guy but it takes time too see the damage walk away for a while then have another look.

 

[psycoticmudder]

measure back from a arm points to rivet on tunnel at same points on tunnel on each side and compare