G4 Sled Shed Cooker Can.

[Merc63]

Thanks to Redrock Kustoms for the speedy service in Edmonton.

Weighs in at 7.8 lbs

 

[snochuk]

Thanks to Redrock Kustoms for the speedy service in Edmonton.

Weighs in at 7.8 lbs

View attachment 200679

Just put one on hold.....next Thursdayish for delivery.

 

[Merc63]

Finally installed the can, fit is good. Only thing that is really tight, the muff pot could be moved slightly in towards the engine a bit to allow the plastic body cover to close easier and not rub against the pot.

Idle sound is throaty and it feels nice and snappy with a good tone full out.

I installed heat reflective tape along the plastic shield where the pipe bends down to the can, around the chain case wires, over the recoil and along the body plastic that the side panel clips to.

 

[Redrock Kustoms]

Awesome! Have a good one!

 

[birdie]

Thanks RedRock Kustoms

Another happy Sledshed customer

Awesome fit

Birdie

 

[snochuk]

Finally installed the can, fit is good. Only thing that is really tight, the muff pot could be moved slightly in towards the engine a bit to allow the plastic body cover to close easier and not rub against the pot.

Idle sound is throaty and it feels nice and snappy with a good tone full out.

I installed heat reflective tape along the plastic shield where the pipe bends down to the can, around the chain case wires, over the recoil and along the body plastic that the side panel clips to.

Ya mine melted inside of panel a bit. It is waaay to tight of a fit.
Going to farm boxing day and will post pics of fix after that.

The rest of the fit was bang on.

 

[snochuk]

I fixed the rubbing of the can and all is well but can is for sale.

Getting a smaller can so I can make a tool box.
Hope ears can take the abuse.

First $350 get the can.
PM me and $300 will not do - it is one day old.