broken motor mounts

assaultn

Active VIP Member
Joined
Oct 25, 2008
Messages
513
Reaction score
766
Location
Sherwood Park
Has anyone else been having problems with 2009-2010 motor mountsl. I went throug a set last year from a drop and another set this year. This time the motor dropped backwards jamin the turbo`s charge box and injectors against the jack shaft which carved a hole in the box. Just wondering if this is just coinsidence or if a guy should beef up the mounts. I realy want to stick with polaris but small issues like a cracked mount can end alot of weekends!!:(
 

ElectroTech

Active member
Joined
May 20, 2008
Messages
39
Reaction score
0
Location
St. Paul, AB
Hey,
Is the bolt breaking or are the mounts separating? The front right tends to snap the bolt. Replacing it with a grade 8 works fine. Are you using any added torque stops? Mine stays dead straight with the SLP torque stop, can put my hand on the clutches after a good pull.
 

corey.greene

Active member
Joined
Dec 8, 2011
Messages
79
Reaction score
62
Location
Lethbridge
Is there anyway to remove a broken mount bolt (front left, directly behind the drive clutch) without pulling the motor? can i get to it from the bottom somehow?
 
Top Bottom