boondocker control box help

[saylerrr]

hey guys its mark i have an 06 m7 with monster twin d & d pipes and can, v force reeds, boondocker box and egt gauge. havin trouble setting my control box and getting my temps the same and im over heating 1200 - 12 70 if pinned to long !! what the hell can i do and can someone help me with the best set up of numbers please.my temp gauge also says one side is burning way hotter then the oter side
mark

 

[rwjk0]

Go to D&D webpage under tech specs

F7/M7 with monster twins, no timing.

3000 = 0 0 9
5000 = 0 0 12
6700 = 14 5 0
7300 = 14 0 0
7800 = 30 15 10
8250 = 30 25 18
8700 = 30 25 22


You need to set your trim, usually the pto side gets way hotter on the Arctic Scraps

 

[saylerrr]

trim up or down and i noticed with that setting you showed that when hammered across field i power out and sputter at 6300 - 700 cant really climb over 7000 rpm it is struggling in the 6300 - 7500 range badly in and out of power why is that you think?? and the one left pipe is hotter then right