07 m1000 engine mounts

[craptabulous]

I'm currently installing a new engine into my m1000 and since it is out i'm replacing the engine mounts . my upper and lower mag side are both yellow dot (45 duro) and the other 4 on the pto side have no marking on them what so ever , if i understand correctly from other posts i want a 60 on the top mag 45 lower and then a mix of 60's and 45's on the pto plate . does this sound right ? if so which ones are the 45's and which are the 60's , i am ordering a linderman mount for the mag side as well .

if anyone knows exactly what goes were i would appreciate it . of course arctic cat wants to sell me the plates as well even though i can order the mounts online from arctic cat .

thanks

 

[cnelson6]

I thought about doing the same thing and replacing them but by the time it was all said and done it was cheaper to just bring out the mounts with the plate from the states

 

[craptabulous]

Its 25$ a mount or almost 300$ for the plate .79$ for mag side 59$ for lower . Its a huge difference

 

[Modman]

Its 25$ a mount or almost 300$ for the plate .79$ for mag side 59$ for lower . Its a huge difference

Get the mounts for the 2005 M7. "Put a green dot one on the upper mag side." This contradicts what you currently have, I'd stick with yellow dots if that is what it was stock. Catman10 I think knows which goes where. Let me check tonight off my sled and I'll get back to you.

Part numbers for all them.

yellow dot 45 duro( rubber stiffness) from 2005 m7. 60 duro green dot (higher duro meaning stiffer mount)
0608-405 (50 duro)
0608-404 (60 duro)
0608-406 (40 duro)
0608-364 (45 duro)

 

[cnelson6]

Hense why I said order the parts from the states. I got mine for 110 not 300 I don't know where your getting your parts from but that seems pretty steep!

 

[cnelson6]

Hense why I said order the parts from the states. I got mine for 110 not 300 I don't know where your getting your parts from but that seems pretty steep!

 

[craptabulous]

Hense why I said order the parts from the states. I got mine for 110 not 300 I don't know where your getting your parts from but that seems pretty steep!

Any time i buy parts from the usa the boarder pulls it all apart and charges me 100$ i wont do it unless absolutly neccessary .