What did you do for your ATV today?
- Thread starter zeebs
- Start date
- Moderator
- #4,202
Beer Slayer
Active VIP Member
Went to Severn Falls for a rip on the weekend. Buddy GPSed the trip, 7 hours...2 hours riding, 5 hours stopped lol. Man was it muddy!
- Moderator
- #4,204
RXN
Active VIP Member
Cdnfireman
Active VIP Member
What kind of machine?
smokinD
Active VIP Member
That is a Beast! U gonna be in for quite a shock, break it in nicely and don't break your neck
RXN
Active VIP Member
Figured I'd give this a go.
Bought one of those Tyed up paracord straps.
Think the guy is out of Ontario.
Ton of colors to choose from. I went with Purple and Gold.
Not going to lie. Pretty sure I'll bend or snap the shackle on it. But we'll give it an honest go. And if i have to go back to my ugly old strap I will.
Bought one of those Tyed up paracord straps.
Think the guy is out of Ontario.
Ton of colors to choose from. I went with Purple and Gold.
Not going to lie. Pretty sure I'll bend or snap the shackle on it. But we'll give it an honest go. And if i have to go back to my ugly old strap I will.
Attachments
- Moderator
- #4,210
- Moderator
- #4,212
papajake
Active VIP Member
After washing my razor decided to see how much mud was behind the side panels that you can’t get at removed both sides and found a 5 gallon pail of old mud and sand from years of riding probably close to 150 lbs
- Moderator
- #4,214
snopro
Active VIP Member
Washed the Gator, fueled, checked tires and got ready to start spraying yard and ditches bordering my land.
- Moderator
- #4,216
RXN
Active VIP Member
Took the kid around the yard on the quad.
Lapped our 3.5 acres enough times to do 7kms between yesterday and today
Lapped our 3.5 acres enough times to do 7kms between yesterday and today
doorfx
Active VIP Member
Piled stuff on it 
zal
Active VIP Member
Replaced the wore out Wicked Bilt power steering and installed the new Superwinch power steering in the rhino.
- Admin
- #4,220
Picked hubs back up from Rusty. Cleaned up the bearing surfaces and cleaned out the bushing surfaces. Put them into the beater car to heat tomorrow in the sun. Bearings are in the freezer. Put bearings in tomorrow and hopefully get rear end back together and good start on front end bushings.
Similar threads
