What did you do for your ATV today?

quadboy55 · Jan 18, 2011

Put on a winch saver and topped up the oil.

racerfromhell · Jan 21, 2011

made myself some GREASEABLE ball joints. I think it will double the life (I hope) Takes about 10 minutes a joint and you have to be very carefull drilling (and not sparing the grease on the drill bit to catch the cuttings)

arff · Jan 21, 2011

racerfromhell said:
nice

I got the information you sent. Thanks

rzrgade · Jan 21, 2011

racerfromhell said:
made myself some GREASEABLE ball joints. I think it will double the life (I hope) Takes about 10 minutes a joint and you have to be very carefull drilling (and not sparing the grease on the drill bit to catch the cuttings)

That is one great idea ,them things do dry out in a hurry !!!I have a syringe and pull the boot back and inject grease ,this is way better, way to go.....

zeebs · Jan 21, 2011

Well today I installed polaris front spring adjusters and took it the machine for a SHORT ride (It was 0 here with a -20 windchill). I gained 1.75" of ground clearance on the front and with them stiffened up it handles amazing. they take most of the body roll out of the front when cornering and no more nose diving when I let off the throttle or hit the brakes! :beer:

MATTIAC · Jan 22, 2011

i stood the yfz on its grab bar, removed the oil drain plug and reinstalled it with a copper oring so it wasnt leaving oil spots all over my garage grrrrrrrrrr.

quadboy55 · Jan 22, 2011

Should probably take it for a wash and tighten up the springs. Also thought about placing an order on a gear reduction.

rzrgade · Jan 22, 2011

Got around to making my roof today ,now just have to paint it. Should stand up well as it is 1/4 puck board . Should add some integrity to the cage as well with 7 mounting points .
I added a few pics of snorkels line ran into the cage ,for a few who were asking......

ICANAM · Jan 23, 2011

I melted my plastic skid plate while melting the ice build up on my a arms with the herman nelson..... lol yipes, what a ritard.. Why is that grase dripping from there? That's not grease...that's melted plastic..ugh

rzrgade · Jan 23, 2011

Yeah , getting to right temp is the hard part...lol My heat gun sucked ,but my acy. torch worked great...

zeebs · Jan 24, 2011

ICANAM said:
I melted my plastic skid plate while melting the ice build up on my a arms with the herman nelson..... lol yipes, what a ritard.. Why is that grase dripping from there? That's not grease...that's melted plastic..ugh

gotta love heated garages!

quadboy55 · Jan 24, 2011

Got an oil change kit and took it to a wand wash. She looks purrr-deeee!!

Mike270412 · Jan 24, 2011

Used my quad as a step to get at the top shelf in the garage.

rider4life · Jan 26, 2011

went and bought all the parts I need to make my snorkles this weekend:d

jay007 · Jan 26, 2011

used it to keep the door propped open on the shed.

Bogger · Jan 26, 2011

..........

munhoez · Jan 26, 2011

Bogger said:
..........

View attachment 79322

those r sum sweet King Quad Dunflops on ur honda!!!!!!!!!!!!!!!!!

Bogger · Jan 26, 2011

munhoez said:
those r sum sweet King Quad Dunflops on ur honda!!!!!!!!!!!!!!!!!

Had no choice.... no one told me my stock 11" rims that have the bear claws wouldn't fit over the disk brake conversion kit....

zeebs · Jan 26, 2011

Took it for a ride, rolled it and smashed some sh!t up. hurt my ass with a slight concussion! Fawkin Popo!

MATTIAC · Jan 26, 2011

looked at it. then moved it out of the way to make room for the miniz raptor 80 predator 90 and edge 340 to come into my garage

What did you do for your ATV today?

Active VIP Member

Active member

Attachments

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Attachments

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Golden Boy

Active VIP Member

Active VIP Member

Bogger of the GBCA

Active VIP Member

Bogger of the GBCA

Active VIP Member

Active VIP Member

Similar threads