Rzr rear spindles grease fittings

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
So I needed to do the breaks, so I will tighten up any loose joints while I have things apart.

New wheel bearings are installed, and now tuning up some bushings at the A-arms to spindle connection. But these joints can only be greased by disassembly.

Has anyone tried drilling and tapping in grease fittings into the spindles?

89cb9d745cfbebcab192046d68eb1014.jpg

cd03dbb104bfeab88bb9215a6f3179ad.jpg

73dfc3bc894042322f88c0999f0c658c.jpg
 
Last edited:

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Question: rzr spindle/bearing carrier maintenance.

d8506f2f2d05e9037ac22dbe18d8d49a.jpg
c7d69ae65fec916e3076232eb2dc3278.jpg
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Question: rzr spindle/bearing carrier maintenance.

???

b5aef5a8adf29735f3770cf7a57ccc0f.jpg

0b1646d80a40da85e11d28dfe8f18c48.jpg

1e0fe1bce765dd1f94146e7c0ff2c6f8.jpg
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Yo mods!

My thread title could use a little tweak,

No more questions!


Kindly adjust: Rzr rear spindles grease fittings

Best Regards!
 

QMAO

Active VIP Member
Joined
Jan 1, 2007
Messages
707
Reaction score
376
Location
Central,Alberta
I drilled, tapped and installed zerks earlier this spring also, the new bushings are tight enough that it is hard to get any grease in. After a few rides a coule zerks took grease. My theory is that if i know there is grease in there, there i no room for mud and water.
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Drilled a couple hole through the pivot tubes to let the grease get inside the tubes to the bolts.

525fcecd5df2e18b279efb91cf3cb34c.jpg
 
Top Bottom