kawasakikx250
Active VIP Member
Hi all. The title says it all. I need help finding one that is stronger. What aftermarket sites are the best to get stuff from?
Can Am Cheap shifter bracket off trans keeps bending?
- Thread starter kawasakikx250
- Start date
- Admin
- #2
contact utv canada, they should be able to help you
DaveB
Active VIP Member
What machine?
If it's a quad, I have never heard of the bracket or linkage bending...BUT, if it is, it's probably because it is very hard to shift...which IS fairly common. If this is the case, it is time to service the 1-way bearings in the primary clutch.
If it's a quad, I have never heard of the bracket or linkage bending...BUT, if it is, it's probably because it is very hard to shift...which IS fairly common. If this is the case, it is time to service the 1-way bearings in the primary clutch.
Last edited:
- Thread starter
- #4
kawasakikx250
Active VIP Member
Ya I have a 2012 outlander 800. It only has like 500 kms on it so it does not need the bearing yet. Once I straightened the bracket it shifted fine. It just bend some times when your in a hole and it doesn't want to shift and you can't rock it.
DaveB
Active VIP Member
Try some molly in the gear oil....you are correct that the 1-ways *shouldn't* need servicing...
The "Can Am hump" is a well-known thing to get these things to shift...I do hear your pain.
The "Can Am hump" is a well-known thing to get these things to shift...I do hear your pain.
turbo392
Active VIP Member
The CanAm one way bearings need replacement from the show room floor. Go buy a pair of 6808RS bearings and throw the factory unsealed bearings in the garbage.
- Thread starter
- #7
kawasakikx250
Active VIP Member
Where do you get these bearing you speak of?
turbo392
Active VIP Member
Any place that sells any bearings at all. Except NAPA because they're idiots. Online is probably the easiest or TSL in the city.
- Thread starter
- #10
kawasakikx250
Active VIP Member
Took my one way apart and the bearings are sealed on both side on my quad.
turbo392
Active VIP Member
That is good, not from BRP then.
Similar threads
