Power Commander Advise

Sofa king · Apr 5, 2017

My friend has a 2009 800 Outlander. When he first got it he had Get Torqued put a new cam and pipe on it so they installed a power commander on it and set it up for him. He had to rebuild the motor recently and he had to bore it out some. As Get Torqued is no longer open and Kevin is busy working. I was wondering if anyone knew a good place he could get the power commander set up properly. Worse comes to worse we may try and figure it out on our own but I am thinking we should probably let a pro do it. Any help/advice would be greatly appreciated. Thanks. (can't spell advice either apparently)

whoDEANie · Apr 5, 2017

You could always get the Atotune module. It won't get you the same numbers as a professional tune, but it will give you a perfect burn.

Sent from my SM-G935W8 using Tapatalk

neilsleder · Apr 5, 2017

Give Kwic racing on here a pm and he might be able to send you in the right direction. He's a can am guy and like doing them up!

Sent from my iPhone using Tapatalk

Sofa king · Apr 6, 2017

I was looking at the autotune module on their website. If we can't find someone to do it, that's the way I was thinking of going. Thanks.

Sofa king · Apr 6, 2017

I'll try Kwic as well. Thanks guys.

whoDEANie · Apr 6, 2017

Sofa king said:
I was looking at the autotune module on their website. If we can't find someone to do it, that's the way I was thinking of going. Thanks.

If you do end up going with Autotune, keep your bung plug in a safe place. When you get a good tune going, pull the O2 sensor and disable Autotune. The O2 sensors are pretty sensitive to moisture and are expensive/hard to find, so only use as needed.

Power Commander Advise

Sofa king

Active VIP Member

whoDEANie

Active VIP Member

neilsleder

Active VIP Member

Sofa king

Active VIP Member

Sofa king

Active VIP Member

whoDEANie

Active VIP Member

Similar threads