2015 RZR S 900 fit on a 8ft sled deck?

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Can anyone tell me if a 2015 RZR S 900 will fit on a 8ft Marlon sled deck?

I am trying to find out if I will need an extension or not?

Is the Marlon ramp wide enough for the 60" width to get up the ramp?


What is the best way to get the machine on the deck, winch it up from the machine to the headache rack?

Thanks
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
It should fit with stock tires. "Should" Including your ramp. Id winch it up to try it the first time. Spread the deck out to give yourself more room the first time too. You could grab a tape measure and verify you length, remember the bumper.
 

papajake

Active VIP Member
Joined
Dec 5, 2006
Messages
2,848
Reaction score
5,605
Location
Didsbury, Alberta
no i have a 2009 standard razor with 27 inch tires and the tail gate will not shut on my 8 foot box the 2015 is longer might need an extension
 

dezmitchell

Active VIP Member
Joined
Jun 8, 2008
Messages
1,406
Reaction score
1,024
Location
Calgary
One could bolt a riser onto the deck and free up some length that way
 

catman1

Active VIP Member
Joined
Dec 24, 2009
Messages
227
Reaction score
213
Location
edmonton
I have a 8ft cross trax, my brothers rzr 800 just fit on the deck. Bumper was uptight on the head ache rack and the back tires where right on the edge. Just drove it up in low range. I wouldn't worry about winching. I think the 900 would be a tight fit
 

rsaruk

Active VIP Member
Joined
Jul 28, 2009
Messages
357
Reaction score
520
Location
Stony Plain
Hopefully your truck is a one ton dually or you will get in trouble here even if you are under legal weight.

Sent from my SM-G920W8 using Tapatalk
 

goodngrubby

Active VIP Member
Joined
Nov 29, 2008
Messages
3,452
Reaction score
4,827
Location
Nanaimo
I had 27" Mambas on my old 900, it fit on my 8' Cross-Trax with no problems. A typical ramp is only 52" wide, and most certainly not designed for the added weight of a SXS. I would look into getting an additional 12" wide ramp built to run along side the original. Talk to Wes at Cross-Trax...he'd be able to hook you up.
 

Attachments

  • IMG_2805 (1024x768).jpg
    IMG_2805 (1024x768).jpg
    51.2 KB · Views: 481
  • IMG_2807 (1024x768).jpg
    IMG_2807 (1024x768).jpg
    48.8 KB · Views: 322

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Yes it is, but why would it matter if you're under legal limit?

Hopefully your truck is a one ton dually or you will get in trouble here even if you are under legal weight.

Sent from my SM-G920W8 using Tapatalk
 

rsaruk

Active VIP Member
Joined
Jul 28, 2009
Messages
357
Reaction score
520
Location
Stony Plain
People on here seem to have issues with trucks that are under weight limits but aren't they way they would do things.

Sent from my SM-G920W8 using Tapatalk
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
The other option is to lose the deck and put it in the bed, IF you have a longbox. I haven't done it as I don't need to but I have seen pics of a wildcat 1000 in the back of a truck with the tailgate down. It is way wider and longer then your rzr.
 

catman1

Active VIP Member
Joined
Dec 24, 2009
Messages
227
Reaction score
213
Location
edmonton
Adding a aftermarket winch bumper can also make a difference for the worst
 

armascott

Armaguard
Joined
Dec 1, 2013
Messages
649
Reaction score
786
Location
St.Albert
So bringing a old thread back up. I have a 8' Marlon deck and I'm thinking about purchasing a RZR S. I have a couple questions about loading it. I'm thinking I'm best off loading it backwards I wouldn't want to drive it up I would rather winch it up. My questions are what should I winch it to on the deck? The headache rack or probably a plate or something on the deck itsself? I'm thinking the headache isn't strong enough. Also I would have 2 dirt bike up on the deck at the same time, the dirt bikes fit on the extensions and all the bike weight is on them. I'm not sure if I would trust the 1" tubes on the extensions not to bend with the weight of the bikes bouncing down the road, has anybody beefed up the extensions some how?

Just curios what others are doing

Also this is probably a question for a different thread but I think instead of mounting a winch to the deck I would rather install a winch on the rear of the RZR. Is that possible if so can someone post pics?

I'm just thinking of ideas I don't really want to upgrade my travel trailer to a toy hauler.

Thanks
 

Rene G

Active VIP Member
Joined
Dec 23, 2008
Messages
15,894
Reaction score
5,338
Location
Grande Prairie, AB
I had a 2015 RZR S that I hauled in a 8’ marathon deck. I drove it up and backed off, never had an issue. It’s waaaayyyy safer than loading a quad because of the longer wheelbase. If it’s a 800S you’re looking at I don’t think the RZR part will b an issue
 

Grinder

Active VIP Member
Joined
Jun 17, 2007
Messages
1,703
Reaction score
3,735
Location
Sherwood Park
I load backwards so the main weight of the engine is forward. I ride mine up, just line up ramps in mirrors do the old granny 1 foot brake 1 gas 4wd on and crawl slowly. The second you spin for any reason stop and role down the ramp readjust or reposition truck if needed. You get used to it. Mine is a 7' truck boss with the extention makes 9'. I do have a 4500# winch mounted in case of no power on sxs but haven't used it yet. Just don't get complacent riding it up. It can always go bad in a second.
58293781c99b205a41947c076c22fee9.jpg

09f97c8f9b091db765d613ef0e2bd810.jpg
32a97bade700614b76f244191555b2f1.jpg
8ca2d71010680b73c9980334b5dbb409.jpg
 
Last edited:

armascott

Armaguard
Joined
Dec 1, 2013
Messages
649
Reaction score
786
Location
St.Albert
I'm think the side by side would have to be winched up regardless because I would have to load the dirt bikes first. I've had the 2 dirt bikes on the deck with a quad in the middle before. I have Bike Binderz to hold the bikes so I can have the handle bars turned. I'm just think winching will make sure the RZR goes on straight and I wouldn't have to navigate between the bikes I know it's going to be a tight fit. I am also thinking going on backwards is best to distribute the weight better. I'm thinking a 800s is probably going to suit us just fine. It's mostly for my wife and daughter to follow my boy and I around a bit and collecting fire wood etc. I like the s just because it's a bit wider and I'm thinking it would be a bit more stable.
 
Top Bottom