Zbroz Front end kits for Pro RMK

JDmotorhead

Active VIP Member
Joined
Sep 14, 2009
Messages
164
Reaction score
84
Location
Fort Mcmurray Alberta
Looking to install a Zbroz front end kit on my 2013 Pro, just looking for feed back from anyone who is running a Zbroz set up! Thanks
 

mx2hunter

New member
Joined
Jan 13, 2014
Messages
3
Reaction score
0
Location
saskatchewan
I run zbroz on my sba with pro spindles and grippers. You need to gring the spindles to clear the arms but they are really well put together and with the 39 my sled rolls on its side easy peasy. It balances perfect! Alt impact makes some too I like the high clearance feature though.

Sent from my SM-G900W8 using Tapatalk
 

Polar_RMK

Active VIP Member
Joined
May 27, 2013
Messages
291
Reaction score
138
Location
Ontario
Where are you guys order it from.
Zbrozracing doesn't answear, any dealers in Calgary?
 

DaltonW

Active VIP Member
Joined
Oct 10, 2012
Messages
294
Reaction score
236
Location
Red Deer
I had the 36" kit on my 15 and loved it. pulled it off to sell the sled, the kit has maybe 300km on it. was on a 15, PM me if interested. can swap spindles as well so ya don't have to trim yours.
 

Polar_RMK

Active VIP Member
Joined
May 27, 2013
Messages
291
Reaction score
138
Location
Ontario
Sorry I am looking for a dealer cuse I need a bunch of different stuff for both Rmk and XM
 

Boost-it

Member
Joined
Oct 6, 2012
Messages
23
Reaction score
175
Location
AB
We are a ZBroz dealer and keep quite a bit of stock for polaris and ski-doo. Two hours north of Calgary.
 

Stockorwalk

Active member
Joined
Sep 27, 2011
Messages
65
Reaction score
75
I had the 36" kit on my 15 and loved it. pulled it off to sell the sled, the kit has maybe 300km on it. was on a 15, PM me if interested. can swap spindles as well so ya don't have to trim yours.
You still looking to sell your 36" kit?
 

Heimie

Active VIP Member
Joined
Jun 8, 2007
Messages
268
Reaction score
359
Location
Stony Plain, AB
I run zbroz on my sba with pro spindles and grippers. You need to gring the spindles to clear the arms but they are really well put together and with the 39 my sled rolls on its side easy peasy. It balances perfect! Alt impact makes some too I like the high clearance feature though.

Sent from my SM-G900W8 using Tapatalk

When you did this, what did you do about shocks? My '13 RMK Assault has 18.5" shocks and I'm told I need to run Pro length of about 16.6". Don't really wanna drop another $1000 on shocks, and just shortening the rods on my stockers is not the right way to do it. Maybe shorten them a 1/2" or so, but not 2".
 
Top Bottom