LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Results 1 to 5 of 5
  1. #1
    Newbie Ballplayer19's Avatar
    Join Date
    Apr 2012
    Location
    Caroline
    Posts
    2

    Rear Skid Sag!!!

    Just put new fox evol burandt edition shocks in my rear end and also have them on front with the new skinz front end on my 2014 Boost-It Turbo 163". I watched the skinz series on how too setup properly with all the specified air pressures. Still end up having around 3-4" of sag in the rear end after all my modifications are done. Can't seem too get less sag. Anyone else have this problem after putting the fox shocks in???
    Air Pressures are as follows:

    Front Skis- 80 PSI Main Chamber
    160 PSI EVOL Chamber
    Rear Skid: Center- 60 PSI
    Back- 120 PSI Main Chamber
    180 PSI EVOL Chamber



    Sent from my iPhone



  2. #2
    Member Jordan1924's Avatar
    Join Date
    Nov 2012
    Location
    Golden Bc
    Posts
    253

    Re: Rear Skid Sag!!!

    Is it on any dollies... under skis or the track.. will do funny things if there is

  3. #3
    Newbie Ballplayer19's Avatar
    Join Date
    Apr 2012
    Location
    Caroline
    Posts
    2

    Re: Rear Skid Sag!!!

    Nope flat on the ground


    Sent from my iPhone

  4. #4
    Member butthead1's Avatar
    Join Date
    Nov 2017
    Location
    kelowna
    Posts
    27

    Re: Rear Skid Sag!!!

    i went from springy thing on the rear from 3 to 4 that gave me just under 3 in sag
    give it a try

  5. #5
    Member
    HotShotHarry's Avatar
    Join Date
    Aug 2007
    Location
    HINTON
    Posts
    1,314

    Re: Rear Skid Sag!!!

    I had the same issue. The fox manual says not to exceed 150 lbs in the main chamber. I had to put 200 in the main and I run 200 in the Evol to get the sag correct. Ran the last 2 seasons like that with no issues.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •