PA sled dolly. Chriot de motoneige.

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA
I seem to recall seeing a thread about these recently but I can't find it.
43c95e76d449de12c97fd3d3fe99c6f4.jpg
6f9b3cea2201cf59abf4e329cada5398.jpg
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA
2 beers in. Still working on shrink wrap.
44aa45df295ebbbec4583215a39ac885.jpg
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
108,538
Reaction score
82,856
Location
beautiful, downtown Salmon Arm, BC
I ordered one from the AC dealer in Salmon Arm. No shipping and it was $220.00.

I had the neighbour do a little welding to meet my needs (didn't want the broomed on the concrete on the new driveway marked up by the runners so I wanted the skis to be totally on the ramp). Raised up the rubber supports by an inch and raised the axle location. Works fantastic. The runners do not touch the concrete and it is very easy to put the smaller dollies underneath for rolling the sled around the garage. A great choice for my situation!!

IMG_4100.jpg

IMG_4101.jpg

IMG_4102.jpg
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA
That looks like the exact same one Doug. Now comes the real test. Will it handle a Cat?
1f291d3236f5224548feaef1daac91da.jpg
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA
Works good. Not sure I'd recommend this for a commercial application, but the amount it will get used around here it should last forever!
e6aa3e7f4707f37e4fcee521a16f23bc.jpg
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,835
Reaction score
41,645
Location
Sherwood Park, Alberta, Canada
See where the two bolts are that connect the two main pieces of the frame together. The square tubing split wide open on mine when It was outside for the night in -20. Lots of torque on that peice
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
108,538
Reaction score
82,856
Location
beautiful, downtown Salmon Arm, BC
See where the two bolts are that connect the two main pieces of the frame together. The square tubing split wide open on mine when It was outside for the night in -20. Lots of torque on that peice

I noticed when I put it together the pieces that slide into that square tubing where too tight and I had to get a file and clear some slag from the weld. They are 2 pieces of channel welded together.
 

raceu4it

Active VIP Member
Joined
Oct 3, 2007
Messages
1,123
Reaction score
1,646
Location
dewinton
You get what you pay for. The PA one's are sort of okay for occasional use, as they're really flimsy. Unless of course they've been improved.
 
Top Bottom