Fire everyone at Brp in the clutching department.

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,141
Reaction score
8,615
Location
Kanedog 2015-2019, thanks for the good times S&M!
How many years does this crapshow have to continue b4 heads are gonna roll?
This is year 3 and sweet fa has improved. It's actually gotten worse. It's simple clutching ffs. How can something so simple be so hard for Brp clowns? I was going to call them engineers but real engineers can figure out simple cvt heat issues in well under 3 years. Unlike Dominic Tessier, a Brp so-called engineer and his team of idiots.
Here's some estimates for the french bean counters-
Bad publicity-$250,000,000 cost in future sales
$50,000,000 in warranty claims and lawsuits.
It's a great business model to put out a faulty product and then screw the consumer by denying warranty claims.
Shareholders sure put up with a lot of corporate incompetence these days.
Oh ya, I almost forgot. Fire the Brp genius who purposely cranked up the oil usage by 150% to sell more oil. The beauty reason for more oil usage? A 169hp engine needs 2.5 times more oil than a 163hp engine. Wtf.
The above are my beliefs.
 
Last edited:

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
How many years does this crapshow have to continue b4 heads are gonna roll?
This is year 3 and sweet fa has improved. It's actually got worse. It's simple clutching ffs. How can something so simple be so hard for Brp clowns? I was going to call them engineers but real engineers can figure out an issue in well under 3 years. Unlike Dominic Tessier and his idiots that's for sure.
Here's some estimates for the french fries-
Bad publicity-$250,000,000 future sales
30,000,000 in warranty claims
It's a great business model to put out a faulty product and then screw the consumer by denying warranty claims.
Shareholders sure put up with corporate incompetence.
2019 sales will be strong, why would the change anything?

They said the were gonna work on clutching for 2019, they don't even know if they have it dialed yet........
 

Crustyolddude

Active VIP Member
Joined
Jun 10, 2013
Messages
529
Reaction score
1,315
Location
Fort Saskatchewan
How many years does this crapshow have to continue b4 heads are gonna roll?
This is year 3 and sweet fa has improved. It's actually gotten worse. It's simple clutching ffs. How can something so simple be so hard for Brp clowns? I was going to call them engineers but real engineers can figure out simple cvt heat issues in well under 3 years. Unlike Dominic Tessier, a Brp so-called engineer and his team of idiots.
Here's some estimates for the french bean counters-
Bad publicity-$250,000,000 cost in future sales
$50,000,000 in warranty claims and lawsuits.
It's a great business model to put out a faulty product and then screw the consumer by denying warranty claims.
Shareholders sure put up with a lot of corporate incompetence these days.
Oh ya, I almost forgot. Fire the Brp genius who purposely cranked up the oil usage by 150% to sell more oil. The beauty reason for more oil usage? A 169hp engine needs 2.5 times more oil than a 163hp engine. Wtf.
The above are my beliefs.

French Engineering Team. Lead hand dictates while others are scared to ask questions. Need to change lead hand out, before change occurs. Likely lead hand related to CEO of company (therefore no change). Another issue French Engineering pick the path for most resistance. Stuff that should be simple, becomes complicated. Don’t ask me how I know. I just know (after many frustrating sessions). Overall product is good. But it could be much better.
 

snochuk

Active VIP Member
Joined
Nov 9, 2006
Messages
6,138
Reaction score
19,818
Location
Edmonton
How many years does this crapshow have to continue b4 heads are gonna roll?
This is year 3 and sweet fa has improved. It's actually gotten worse. It's simple clutching ffs. How can something so simple be so hard for Brp clowns? I was going to call them engineers but real engineers can figure out simple cvt heat issues in well under 3 years. Unlike Dominic Tessier, a Brp so-called engineer and his team of idiots.
Here's some estimates for the french bean counters-
Bad publicity-$250,000,000 cost in future sales
$50,000,000 in warranty claims and lawsuits.
It's a great business model to put out a faulty product and then screw the consumer by denying warranty claims.
Shareholders sure put up with a lot of corporate incompetence these days.
Oh ya, I almost forgot. Fire the Brp genius who purposely cranked up the oil usage by 150% to sell more oil. The beauty reason for more oil usage? A 169hp engine needs 2.5 times more oil than a 163hp engine. Wtf.
The above are my beliefs.

With all the belts and extra parts BRP sells they had a record profit year in 2017.
The share holders will see everything as just jim dandy!

Doolaid is powerfull stuff!
Don't be holding yer breath waiting for that change to roll around.
lol

That fire a couple years back was not quite big enough.
Oooops....wrong kind of fire
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,483
Reaction score
18,413
Location
Edson,Alberta
They made a change to the clutches, didnt yah notice the fancy centrifugal blower for a secondary.
 

X-it

Active VIP Member
Joined
Jan 8, 2007
Messages
7,274
Reaction score
16,306
Location
Prince George
Well finally someone who can fix BRP s clutches. How many have you fixed so far?
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,483
Reaction score
18,413
Location
Edson,Alberta
Unfortunately the problem is not all clutching related, lots of other issues that’s causing belts to explode.
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,141
Reaction score
8,615
Location
Kanedog 2015-2019, thanks for the good times S&M!
Unfortunately the problem is not all clutching related, lots of other issues that’s causing belts to explode.

Yes, there are issues starting from the engine and primary all the way through the drivers even extending to the track. Imo, the drivetrain and handling is full of problems and cannot be fixed unless there is a complete chassis and drivetrain redesign. Ya listening Dominic Tessier and Brp ding dongs? What, 3 years of exploding belts and popped motors isn't enough evidence? Whats is gonna take? FOUR years of pain and suffering?
I thought life was about learning from mistakes. Not covering up mistakes with lipstick. Joke. What a joke.
 
Last edited:

jpmez69

Active VIP Member
Joined
Dec 9, 2010
Messages
781
Reaction score
1,574
Location
Edmonton
Yes, there are issues starting from the engine and primary all the way through the drivers even extending to the track. Imo, the drivetrain and handling is full of problems and cannot be fixed unless there is a complete chassis and drivetrain redesign. Ya listening Dominic Tessier and Brp ding dongs? What, 3 years of exploding belts and popped motors isn't enough evidence? Whats is gonna take? FOUR years of pain and suffering?
I thought life was about learning from mistakes. Not covering up mistakes with lipstick. Joke. What a joke.

You're an idiot. I'm curious......what actual technical qualifications do you have exactly?
 

catrutt

Active VIP Member
Joined
Jan 14, 2009
Messages
837
Reaction score
1,236
Location
okotoks
Why is it that all the 850's I ride with have been great. No problems at all! I am looking for a new sled next year to replace the trusty T3 and am very puzzled.How can you tell the hype from truth? Actual numbers on failure percentages would be good... If any sled goes through 4 belts in 2 days it has to be a setup problem.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Why is it that all the 850's I ride with have been great. No problems at all! I am looking for a new sled next year to replace the trusty T3 and am very puzzled.How can you tell the hype from truth? Actual numbers on failure percentages would be good... If any sled goes through 4 belts in 2 days it has to be a setup problem.
Gotta be.
Owners probably are not checking belt deflection.
 

bobsledder

Active VIP Member
Joined
Jan 11, 2009
Messages
2,698
Reaction score
5,700
Location
Not Sure
Why is it that all the 850's I ride with have been great. No problems at all! I am looking for a new sled next year to replace the trusty T3 and am very puzzled.How can you tell the hype from truth? Actual numbers on failure percentages would be good... If any sled goes through 4 belts in 2 days it has to be a setup problem.
Can't really say. All I know is the one I have has been trouble free. Sems to be a crowd on here moaning and whining about them and they don't have one of their own. Not sure what their deal is.
 

Halon60

Active VIP Member
Joined
Oct 23, 2016
Messages
192
Reaction score
345
Location
Canoe BC
Can't really say. All I know is the one I have has been trouble free. Sems to be a crowd on here moaning and whining about them and they don't have one of their own. Not sure what their deal is.
Doo r ****
 
Top Bottom