Help! Backfiring bad

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
08 XP 800. Backfiring and won't run worth sheeiiit. Put new gas in new plugs still nothing. starts fine idles fine but give er throttle and it pops and backfires. Any ideas? Ran good last weekend. TIA
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Intake or exhaust backfire? Did you check reeds?
Haven't checked reeds but exhaust is backfire. Put rag by exhaust and it was spitting oil. Plugs were new and after 5mins are wet and black
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,514
Reaction score
16,889
Location
DA Moose B.C
Take dpm out, take it apart and wd40 it

Used 9 volt battery to activate it back and forth

If dpm is stuck, or quits it goes full rich
 

firstdoo

Active VIP Member
Joined
Nov 21, 2013
Messages
721
Reaction score
1,620
Location
Stony Plain
I hope you figure it out but if you don't ..................... my '14 is still available, just saying lol.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Take dpm out, take it apart and wd40 it

Used 9 volt battery to activate it back and forth

If dpm is stuck, or quits it goes full rich

took it out and blasted it with wd40 and tryed to hook battery to it and it didn't move. No sound no nuttin. That mean it's toast? Or should I be able to see movement in the lil brass piece?
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,514
Reaction score
16,889
Location
DA Moose B.C
took it out and blasted it with wd40 and tryed to hook battery to it and it didn't move. No sound no nuttin. That mean it's toast? Or should I be able to see movement in the lil brass piece?
Should hear it click or move
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Should hear it click or move

Also forgot to mention that when it started back firing I pulled the exhaust side cover off and noticed my oil level went right down to the bottom line. Fired it back up moved it 10feet and checked it again and it was back to just under full. Where did the oil go? Bottom of crank then push back up? Is that normal?
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,514
Reaction score
16,889
Location
DA Moose B.C
Also forgot to mention that when it started back firing I pulled the exhaust side cover off and noticed my oil level went right down to the bottom line. Fired it back up moved it 10feet and checked it again and it was back to just under full. Where did the oil go? Bottom of crank then push back up? Is that normal?
Ummmmm, that's weird


How bad did it smoke, cause if crank was full then it would almost hydro lock lol
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Ummmmm, that's weird


How bad did it smoke, cause if crank was full then it would almost hydro lock lol

no smoke

put new plugs in and ran for 2 mins then pulled out and looked like this...
image.jpg
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,514
Reaction score
16,889
Location
DA Moose B.C
Doesn't look oil, looks fuel


Light it with a lighter and see what it does
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Changed out DPM just now and started off ok, the. Right back to back firing...shut it off for a few mins and started it and sounded like a gun shoot backfire....
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
Anyone recommend a place to take it to get looked at in or around the Edmonton area? I don't know what else to do...have to pay someone to tell what's going on...TIA
 
Top Bottom