Establishing a province wide emergency sledding channel.

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,771
Reaction score
3,876
Location
Pemberton
Hi guys and gals. I would like it to become standard for those that have dual channel radios to monitor FRS 16 for emergency use only. This would be similar to the marine channel 16 and could also be used for getting a hold of other groups before moving to a different channel. I think FRS 16 would better than 9 as the power output for 9 is restricted to 1/2 watt. I have over 500 dual channel radio out there now and lots have bought elsewhere as well so I think there are enough out there now to make this worthwhile.

Let me know what you guys (and gals) think.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Hi guys and gals. I would like it to become standard for those that have dual channel radios to monitor FRS 16 for emergency use only. This would be similar to the marine channel 16 and could also be used for getting a hold of other groups before moving to a different channel. I think FRS 16 would better than 9 as the power output for 9 is restricted to 1/2 watt. I have over 500 dual channel radio out there now and lots have bought elsewhere as well so I think there are enough out there now to make this worthwhile.

Let me know what you guys (and gals) think.

Great Idea

IMO a 1/2 Watt FRS channel isn't gonna be very effective, range wise.

Can we settle on a VHF frequency?
140-160mhz range.

People with the FRS the channels can't monitor two frequencies at once either.......
So who would be listening?
 
Last edited:

fnDan

Active VIP Member
Joined
Dec 7, 2006
Messages
1,444
Reaction score
1,439
Location
Foothills
Good idea!

For those that have dual band radios, FRS 16 is Frequency 462.575. Correct?

For emergency contact info for my Spot Messenger, I include the radio channel our group uses.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,510
Reaction score
19,964
Location
Salmon Arm
I think it's a great idea.

Great Idea

IMO a 1/2 Watt FRS channel isn't gonna be very effective, range wise.

Can we settle on a VHF frequency?
140-160mhz range.

People with the FRS the channels can't monitor two frequencies at once either.......
So who would be listening?
I would rather use a VHF channel as well but too many people run FRS radios to not use an FRS channel IMO. Our SAR group carries BCA as well as FRS radios when on sled tasks.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
I think it's a great idea.


I would rather use a VHF channel as well but too many people run FRS radios to not use an FRS channel IMO. Our SAR group carries BCA as well as FRS radios when on sled tasks.
True.
Just so weak.
Pick a 1 watt channel atleast?

https://backcountryaccess.com/faqs-bc-link-radios/

78ef5507ee94852a21d9637bf7f75570.jpg
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,771
Reaction score
3,876
Location
Pemberton
I think it's a great idea.


I would rather use a VHF channel as well but too many people run FRS radios to not use an FRS channel IMO. Our SAR group carries BCA as well as FRS radios when on sled tasks.

exactly, to many people are using rino and BCA. Even with only 1 watt output the better whip antennas will pick them up farther away.

"FRS 16 is Frequency 462.575. Correct?" yes and make sure you aren't using any sub channels.
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,771
Reaction score
3,876
Location
Pemberton
Great Idea

IMO a 1/2 Watt FRS channel isn't gonna be very effective, range wise.

Can we settle on a VHF frequency?
140-160mhz range.

People with the FRS the channels can't monitor two frequencies at once either.......
So who would be listening?

We would, that is the point. If they get into trouble that their group can't deal with then they might be able to call for help on FRS 16
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
We would, that is the point. If they get into trouble that their group can't deal with then they might be able to call for help on FRS 16
But say you get in trouble Ray would you want not want to broadcast on the channel with the most throw?

If you are only in the backcountry with a frs radio you are I'll prepared imo.

Just sell them the appropriate radio........

I see more VHF radios on the hills now that not.
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,771
Reaction score
3,876
Location
Pemberton
But say you get in trouble Ray would you want not want to broadcast on the channel with the most throw?

If you are only in the backcountry with a frs radio you are I'll prepared imo.

Just sell them the appropriate radio........

I see more VHF radios on the hills now that not.

Well I would love to sell them one of my setups but their are still a lot of BCA out there.
 

pano-dude

Active VIP Member
Joined
Nov 17, 2007
Messages
4,388
Reaction score
13,654
Location
invermere
In theory this is a good idea, Imo the frs channel is the way to go based on more users. For my group the rhino is what we use and usually have at least 2 in reach devices. I leave my VHS in the truck.
 

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
Ray, you have to remember that push to talk basic radios have been in the mountains for many years, BCA just expanded on that experience and hit the marked hard and tons of peeps are running that system.
I agree, you cant help everyone.
Pick a channel for your radios and possibly a back up for FRS.
I have both and know the distance of yours is superior.
This is a great idea. Simulator to the CB days where channel 9 was Emergency.

CheerZ.
 

1200

Active VIP Member
Joined
Nov 11, 2010
Messages
537
Reaction score
595
Location
k town
I think u got a good idea . U got to just pick a channel and go with it. I thought Those crap radio s were 2 watt?
 

Phat Cat

Active VIP Member
Joined
Oct 15, 2008
Messages
286
Reaction score
288
Location
Lacombe, Alberta
Hi guys and gals. I would like it to become standard for those that have dual channel radios to monitor FRS 16 for emergency use only. This would be similar to the marine channel 16 and could also be used for getting a hold of other groups before moving to a different channel. I think FRS 16 would better than 9 as the power output for 9 is restricted to 1/2 watt. I have over 500 dual channel radio out there now and lots have bought elsewhere as well so I think there are enough out there now to make this worthwhile.

Let me know what you guys (and gals) think.
Yes this is a great idea but I think it should be up to BCSF to decide what channel and frequency. Have you contacted anyone on the board?
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
I think u got a good idea . U got to just pick a channel and go with it. I thought Those crap radio s were 2 watt?
The radio its self is capable of 2W and used to be advertised as such, but I see they pulled that from their website.

Not a single channel on those radios are programmed above 1W.

I can't understand why people continue to spend more money on these.

If you get burried in the trees, no one will ever hear you unless they can see you.

Think about that while you are throwing your UHF radio in the garbage.
 
  • Like
Reactions: RGM

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
139,155
Reaction score
55,015
Location
Leduc
Great idea, pick a channel and go with it.

This summer testing your radios our group purchased.

Range was fantastic.
 
  • Like
Reactions: RGM

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
6,604
Reaction score
33,437
Location
Gibbons, Alberta, Canada
FRS 15-22 are the same frequency as GMRS 1-8. For the radio I have sold if you punch in 016 it will show up as GMRS2 which is the same as FRS 16

Hey Ray.
So I know nothing about Radios.
Last year I bought a BCA. Which is good
This year I bought one of yours. Now I need to learn how to use it.

I think mine is an 82. So will GMRS2 work on mine as well for FRS16?

Also how do I change the frequency for different logging roads? Or is it only the preset channels I get to use?
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,505
Reaction score
16,871
Location
DA Moose B.C
Hey Ray.
So I know nothing about Radios.
Last year I bought a BCA. Which is good
This year I bought one of yours. Now I need to learn how to use it.

I think mine is an 82. So will GMRS2 work on mine as well for FRS16?

Also how do I change the frequency for different logging roads? Or is it only the preset channels I get to use?
Preset rr channels for logging roads, every road has sign at bottom saying what rr it is
 
Top Bottom