Caper11
Active VIP Member
As the title says Im looking for one.
Thx in advance
Thx in advance
ISO RB2 Roosterbuilt helix
- Thread starter Caper11
- Start date
slededjr
Active VIP Member
I'll check the tickle trunk tomorrow evening. Had a 1, 2 and 3. Should be still there
- Thread starter
- #3
Caper11
Active VIP Member
Sounds good thx.
Haven't tried an of his stuff, but put a QR11 i had from my 860xp in my 15 T3 174. Was night and day, was very happy with it. Would like to try Paul's stuff out as I hear lots of good stuff too. Maybe we can get together one of these days in the hills and I can throw a leg over yours. Cheers
- Thread starter
- #5
Caper11
Active VIP Member
Found one, thx slededjr.
- Thread starter
- #6
Caper11
Active VIP Member
Yah you bet, Ive been running RB stuff since 09, I use there baseline as a guide and finesse it to my liking. I clutched my Brothers BB with RB stuff and he has a ear to ear grin.
Been running Joe's stuff since '09. Tried my own combination in 15& 16 an went back to Joey last winter. Have talked to Paul a couple of times and ben nothing but helpful. maybe this season. Cheers
takethebounce
Active VIP Member
Throw that stuff in the recycle bin and run RB's stuff. It will help you get off the trail once in awhile lol
I don't know Dan...I still ride skidoo...off trail ok for me?
Bnorth
Active VIP Member
Nope, pro only zone with Danny lol
deaner
Active VIP Member
Wait.....this isnt for a G4 is it? Clutching is perfect already.
I'll jump on this band wagon....after the banter I want to see what I am missing. Whatcha got in that tickle trunk of yours?
- Thread starter
- #13
Caper11
Active VIP Member
Is your 174 stock? If yah get some RB stuff let me know and I can help you with T3 setups.
Last edited:
slededjr
Active VIP Member
ill look tonight and see what's all left in there.
Do people actually ride their crap stock? Just the regular bolt on stuff. TSS pipe, bikeman y-pipe, tunnel dump can, mountain fit hood and intake, doo doctor floating secondary, different top gearing, running the chain without the tensioner, QR11 helix, 135/355 primary spring, 218/305 secondary spring, 14.5gram pins, raptor shocks and a muff pot. Waiting for the warranty to be up before I do any timing advance or get Linderman to do some porting.
- Thread starter
- #16
Caper11
Active VIP Member
Nice, it looks like yah have a nicely setup sled.
It is not too bad...I ride with Oler123 and JMCX, I gotta cheat as much as I can!!!
slededjr
Active VIP Member
Have RB3, QR22,48/42, 44/33, 49/46, 43/47, in qrs helixes. 50,52/44 in formula style helixes. 42/40, 38 cat helixes,
doo ramps tra 1 and 2 clutch ,286,297,295,280. TRA3, 413,414,415 ramps. BL/GN, BL/PU, YL/OR, doo drive springs. 2011 800 etec ecm with capacitor, rave solenoids 800R engine. That about sums up what's left available from the tickle trunk
doo ramps tra 1 and 2 clutch ,286,297,295,280. TRA3, 413,414,415 ramps. BL/GN, BL/PU, YL/OR, doo drive springs. 2011 800 etec ecm with capacitor, rave solenoids 800R engine. That about sums up what's left available from the tickle trunk
Billy Boy
Active VIP Member
I have Joey's kit in my 03 600 HO Summit made all the difference in the world. I am thinking of putting a kit in my 11 Etec I am thinking I will putt in another Joey kit but I might have a close look at a RB kit.
- Thread starter
- #20
Caper11
Active VIP Member
The RB3 helix is for a 2011 etec. Slededjr has one.
Similar threads
