Riser

plio7

GBCA Member
Joined
May 5, 2009
Messages
9,410
Reaction score
9,018
Location
Calmer, formerly of the GBCA
Ok so my buddy has a 2003 summit and can't get the riser to tighten enough that the bars won't swivel.... Tried tightening, putting in rubber and tightening more, putting screws through to lock it, but this phucking thing won't tighten down enough to keep the bars from tilting...... Is this a stock skidoo steering post? Because he bought a different riser off of echo marine and the holes didn't line up

ImageUploadedByTapatalk1350173726.096972.jpg 138045[/ATTACH]
 

Attachments

  • ImageUploadedByTapatalk1350173631.846086.jpg
    ImageUploadedByTapatalk1350173631.846086.jpg
    42.9 KB · Views: 165

02 summit 700

Active member
Joined
Jun 4, 2011
Messages
74
Reaction score
6
Location
canada
in pic 2 i can see in the top left corner the the block holding the pivot tube is broke right in half theres your problem and it looks like the other one is snapped also over tightened it ??
 

lshobie

Active member
Joined
Oct 27, 2011
Messages
104
Reaction score
186
Powermadd pivot riser and rised, they never move on me.
 

Barker

Active VIP Member
Joined
Jan 2, 2012
Messages
731
Reaction score
861
Location
AB/MT
I agree with 02 summit 700 there should be a gap between the cap and its mate, and looks broken!
 

Rstone

New member
Joined
Oct 30, 2012
Messages
1
Reaction score
0
Location
Drayton valley
my 01 has a powermadd pivot adapter and pivot riser block it works good never had a problem with them coming loose
 

Barnes

Active VIP Member
Joined
Oct 12, 2010
Messages
214
Reaction score
43
Location
Morinville
When i picked up my sled off Teth-air, this was another one of those things that was broken. Had to replace the two caps because they were cracked. I think it ran me about $40 or more. Check with the dealer
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,767
Reaction score
5,495
Location
Edmonton
You have to be careful with this add on-to-plate system.

the weakest link is the factory steering post plate on the underside. I would weld gussets under it, because I broke mine high up in westridge.. NOT fun coming down with a handlebar that is barley held on with cracked welds..
 
Top Bottom