Gauge programming

Woodsie1984

Active VIP Member
Joined
Nov 12, 2012
Messages
404
Reaction score
766
Location
Pg B.C
Anyone know if someone does gauge programming in Canada ? Have a 2012 premium gauge I want to get the temp bars displayed on them. Don’t want the module you can buy for it. Their is a guy in states that can program them but would rather do it in Canada for less hassle of the border. Tried my local ski doo dealer in Prince George but they are completely useless.
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
Anyone know if someone does gauge programming in Canada ? Have a 2012 premium gauge I want to get the temp bars displayed on them. Don’t want the module you can buy for it. Their is a guy in states that can program them but would rather do it in Canada for less hassle of the border. Tried my local ski doo dealer in Prince George but they are completely useless.

Chris Bondi and Bill Cudney both do it. It’s done in the ecm flash. I had Bondi do a few for me over the years now.



http://www.cudneyracing.com/REV_XS_XR_1200.html
 

Woodsie1984

Active VIP Member
Joined
Nov 12, 2012
Messages
404
Reaction score
766
Location
Pg B.C
Awesome thanks I’ll try them. Ski doo dealer trying tell me it’s not possible to do the 12’s you have to buy the module and gauges have to be synced to the ecm for them to work. Basically called me a liar that I took gauges from a 800 etec and put them in my 1200 4-tec. Not very happy with them.
 
Top Bottom