2011 Summit 800 electrical issues

DELOW

Member
Joined
Nov 4, 2008
Messages
20
Reaction score
20
Location
Killam
I Have a 2011 summit X 800. I have 3 issues not sure if they are all because of one issue or if all separate.
1. Fuel Gauge did work then one afternoon it says 1/2 tank then by the time got to bottom of the mountain it was full. And hasn't left full since.

2. Hand warmers work once in a blue moon. An I know that they only work over 1900 rpm. But the hardly ever work thumb included.

3. Now I hope some one can tell me if this is an issue or a option I don't have. But I don't have a heat gauge. It shows in the left corner of the screen when I first fire up for a second when all the lights are on but that's it. Is it something I can add.

I know now these are first world problems but there more a pain in the ass then anything.
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
You can ad heat gauge yes. Buy the premium module from dealer and it plugs into back side. Your other issues sound like a faulty cluster.
 

DELOW

Member
Joined
Nov 4, 2008
Messages
20
Reaction score
20
Location
Killam
Thanks for the help. I think the biggest pain is the hand warmers. Any idea what to check there.
 

Dougie

Member
Joined
Jan 16, 2012
Messages
23
Reaction score
47
Location
Cold Lake,Alberta
Hey !I would check the obvious, broken wires at the handgrip, or I have seen quite a few shorted out heat elements that aren't visible. Let it snow !!!
 
Top Bottom