skidoohoser
New member
Anyone try one of these? Looking for a little cheap, bolt on HP. Sled is a 2015 T3 163 and I ride 6-10,000ft.
Thanks for any info,
Rich
Thanks for any info,
Rich
Powder Freaks E tec head
- Thread starter skidoohoser
- Start date
Bnorth
Active VIP Member
Bump anyone try a high comp head on the etec?
Never tried powder freaks, but my friend had Ralph at Split Second do some head work on his Etec. Made 19hp more on the dyno.
Pretty much the same power as a BB with just headwork and porting. Ralphs the man.
oler1234
Active VIP Member
Bnorth
Active VIP Member
Thanks Dan. I was going to call Linderman tomorrow I will add Split Second to the list as well.
tex78
Active VIP Member
Hey , screw u cheater
Bnorth
Active VIP Member
My last riding crew was all skinny fawkers have to cheat to keep up but you're normal sized so maybe it won't be so bad this year LOL.
tex78
Active VIP Member
U and brian cheat together, fawkers
3 inch tracks and all , still think to side hill and turn up so u can dig it and pin it a 2.5 is better
Hope old Revblu sees this lol
slededjr
Active VIP Member
Phoned Ralph last year and he said 7 to 8 HP. His BB was around 18 to 20 HP
Umm ! 19hp with port and head work !!?? have hard time with that one ! Be race porting- compression 14.7 - have to run c16
Just what my friend told me, I think I saw the dyno sheet too, this was 3 years ago though. I do know it ran VERY well for a stock bore Etec. But call Ralph, ask him about it. It is not my dyno or work.
Last edited:
oler1234
Active VIP Member
Baker was saying the same thing when I talked to him about it... 15-19hp extra pending how far you wanted to go. I think Ralph's price was very reasonable as well. Bout 2/3 cost of a big bore
Bakers sled was pretty impressive after it was ported last year.
Team Pigeon
Active VIP Member
Bump. The original question on powder freaks head was never answered. Any updates??
Thinking about his $1400pkg.
Dual ring pistons
Thermostat housing
Head
Ypipe
Thinking about his $1400pkg.
Dual ring pistons
Thermostat housing
Head
Ypipe
treeboy
Active VIP Member
Powder freaks head is very nicely built. Way more cooling surface area on the domes than stock. He machines all his own stuff in house and dynos. Good mid range gains with his head.
Will know more in a few days. Put a bondi box for first trip, didn't notice much, installed a powder freaks head and dynoport y pipe since then, Will run this stuff for a couple days. Will install bikeman pipe I picked up on kijiji after to see if there is gains over stock pipe after a couple days. Not sure how far stock fueling will compensate for. Ran a afr last trip to get a baseline, going to keep adding parts and see where it changes.
oler1234
Active VIP Member
Team Pigeon
Active VIP Member
Mr.1100
Any updates? Deciding on his head ypipe double ring piston coolant housing kit.
Any updates? Deciding on his head ypipe double ring piston coolant housing kit.
Similar threads
